@pedpete It could be as simple as turning off and on the modem. Some only will 'connect' to the last device attached to it as it 'remembers' the MAC Address of the attached device. Power off both the...

@coolbreeze Not sure I can help, other than to say I am not having this problem? I've got 2 PC's running W10 V1909, on Home, the other Pro. Also a iPad's and Phone that can read the SHARE's on the...

alice1 wrote I wanted to set up my router. At that time it wanted an IP address and I have given 192.168.254.254. But I don't why I couldn't access the IP address even after trying many times. What...

@Kobe0921 Smart Connect when enabled should manage the 3 SSID's. Since the printers are only 2.4Ghz they should still see the SSID (all 3 SSID's are set the same and the same password under Smart...

@Kobe0921 If using the same SSID for both bands, how would you know which you even connected too? Not using Smart Connect that manages all 3 bands, you might always connect to the stongest one the...

@Monk, As Tony says, W10 presents a different problem. SMB1 needs to be used as the router uses NETBIOS for sharing. Under Programs and Features you need to ADD WINDOWS FEATURES and select SMB 1...