typhoon_2099LV1Online
Following: 0Followers: 0
Forums/ Powerline Adapters
2020-07-30 15:37:01
Re:Where to get softloader for TL-PA4010(UK) V3?
@Tony Actually, that firmware does work on the UK V3 adapters, I can boot into it using plcboot and my original PIB (downloaded using plctool). The issue I have is that the TP-Link Utility not only...
0KUDOS
Forums/ Powerline Adapters
2020-07-30 15:13:47
Re:Where to get softloader for TL-PA4010(UK) V3?
@Tony I downloaded a newer firmware from this forum post, in it they explain that the firmware should work for any powerline adapter that uses the QCA7420 chip, such as the TL-PA4010. Is this not...
0KUDOS
Forums/ Powerline Adapters
2020-07-29 20:09:34
Where to get softloader for TL-PA4010(UK) V3?
Does anyone have a softloader for flashing the NVM/PIB files via plc utils? I've tried so many ways to get the firmware updated on my (now bricked) adapters, the TP-Link Utility bricked them and I've...
0KUDOS
Forums/ Powerline Adapters
2020-07-29 20:06:00
Re:Firmware for TL-WPA4XXX, TP-PA4XXX AV500/AV600 adapters QCA7420-1.5.0.0026
@PowerlineFW Where can I find a softloader? I can't get my adapters to save the NVM/PIB to flash without it.
0KUDOS
Forums/ Powerline Adapters
2020-07-27 22:01:51
Re:Firmware for TL-WPA4XXX, TP-PA4XXX AV500/AV600 adapters QCA7420-1.5.0.0026
@2MEX2 Oh. When I used the TP-Link utility it updated for a while then failed, which also bricked my V3 adapters. My V1.2 adapters updated fine, and all 4 were upgraded using their PIBs downloaded...
0KUDOS
Forums/ Powerline Adapters
2020-07-27 20:43:34
Re:Firmware for TL-WPA4XXX, TP-PA4XXX AV500/AV600 adapters QCA7420-1.5.0.0026
@2MEX2 What exact commands did you use? Whenever I try to flash I get an error (no NVM softloader present in flash memory, 0x71). I can run the new firmware without flashing but the device is...
0KUDOS
12