Home Network Community > Wi-Fi Routers > AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
< Wi-Fi Routers

AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-05 21:29:46 - last edited 2020-10-05 21:31:58
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20200714 rel.18254

Latest firmware 1.1.1 Build 20200714 rel.18254 breaks all the 2.4 GHz "appliance like" devices I own like Yamaha receivers, Chamberlain garage door opener, Nest Thermostat, Google Home speakers, Lifx Wi-Fi light bulb.... "Computer like" devices seem OK (smartphones and tablets, Windows computers, Chromebooks).

 

Switching to mixed b/g/n mode seems to fix it. When in b/g/n/ax mode, devices will not connect or will not obtain an IP (on the fancy Yamaha CX-A5100 I can see that it found the WiFi network but gets a 169.x.x.x IP address). For the record, I am using a Linux server on the wired network for DHCP, not the router, but I don't think this is the root cause or even connected.

 

Feature or bug?

  1      
 
  1      
 
#1
Options
8 Reply
Re:AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-06 18:18:24

@motorider 

 

When the connection "breaks" what mode is enabled?  AX only or b/g/n/ax mixed?  It is possible that these devices are not yet updated to work with AX mode enabled.  Even though AX is supposed to be fully backwards compatible there have still been issues.  One thing to you can do to test this theory is try your nest thermostat on 5GHz with A/N/AC/AX mode enabled.  Let us know if it works or not. 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#2
Options
Re:AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-07 22:00:45

@Carl  Working config shown below. When "Mode" (shown by arrow) is set to "802.11b/g/n/ax mixed" those devices don't work. On "802.11b/g/n mixed" they work. All other setting stay the same. I can *sometimes* get devices to work by dropping encryption level but after rebooting the router devices might still drop off the network. Config below with shutting off AX fixes it. 5GHz devices are all fine with out of the box settings ("802.11b/g/n/ax mixed"). I'm pretty sure this is a bug since I believe they all worked out of the box with the original shipped firmware (unfortunately I don't know which version that was).

  0  
  0  
#3
Options
Re:AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-07 22:02:00

I may give the Nest a try when I have a moment, IIRC it didn't have 5GHz (I think it's gen 2 IIRC).

  0  
  0  
#4
Options
Re:AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-08 18:54:43

@Carl confirmed, the Nest doesn't have 5Ghz.

  0  
  0  
#5
Options
Re:AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-08 20:40:16

@motorider 

 

Sorry about that I was basing that off my Nest.  It does have 5GHz as well.  I'm am going to engage our engineering team to see if they have any suggestions.  I'd like to avoid replaceing a product if it doesn't actually need to be replaced.  I will respond when i hear back. 

 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#6
Options
Re:AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-12 16:36:22

@motorider 

 

Here is the response from our engineering team:

 

The latest firmware 1.1.1 Build 200714 does have changes on the wireless module, it adds WPA3 feature, but I checked the screenshot provided by the user, he didn't use WPA3. At present. we can't locate the reason. I have two solutions:


a. This user mentioned that there is no problem with the previous version. We can help the user downgrade back to the previous firmware version to solve the problem, which can fix the user's problem in a short time.

Note: The latest firmware 200714 set limitation on the downgrade, we need to use beta firmware to help customers downgrade. The process is a little complex, we suggest we can schedule a remote session with the user to finish it, If it goes well, the process will be completed in 15 to 30 minutes.

b. If the user is willing to cooperate with us and go further about the problem, please tell me the Email of the user, I will follow up the issue using new Ticket.

 

 

My suggestion would be to try option B.  the reason being is that you would likely need to work with support to do a downgrade anyways why not try to resolve the concern on the current firmware.

 

What I would need you to do is send an email to ussupportteam@tp-link.com.  Include a link to this thread, your name a good phone number and email address they can reach you at and a good 1-2 hour window when you would be available.  Our engineering team is located in China so they would be available during our evenings 5:30 pm Pacific to 6 am Pacific. 

 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#7
Options
Re:AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-12 17:41:17

@Carl I don't think this is anything wrong with my router or a case for product replacement - it just looks like a firmware/software bug. The hardware seems fine to me. Let me know what the engineers find.

  0  
  0  
#8
Options
Re:AX6000 Latest firmware breaks 2.4Ghz "appliance like" devices
2020-10-12 17:44:09

@Carl Sorry I missed that last reply of yours. I see no reason to downgrade now when it works fine as long as I turn off 2.4Ghz ax and I have no devices that would use ax at this time. Please just keep trying to resolve the issue in software for a future release. It appears not to be very difficult to reproduce.

  0  
  0  
#9
Options

Information

Helpful: 1

Views: 1196

Replies: 8

Related Articles
 Archer AX6000 v1 1.3.1 breaks QOS
520 0
AX6000 Firmware Country-Dependent?
1125 0
New firmware for the Archer AX6000
2173 0
 AX6000 keeps dropping 2.4ghz channel
397 0
 AX6000 - 2.4Ghz providing ~200Mbps on my S10+
843 0
 AX6000 2.4GHz/Smart Connect Issues
4618 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.