How to wire HS200

 
How to wire HS200
How to wire HS200
2021-01-03 02:39:47 - last edited 2021-01-05 22:20:12
Model: HS200
Hardware Version: V1
Firmware Version: 1.0

Looking for instructions to connect HS200 replacing existing Leviton Decora regular switch. Here are the wires 

 

Copper 

RED

BLACK

WHITE

 

So far this is what I've figured Copper is Ground, WHITE is Hot, RED/BLACK are travelers. WHITE is on Common switch.

Unfortunately I dont hv Leviton switch model no.

0
0
#1
Options
1 Accepted Solution
Re:How to wire HS200-Solution
2021-01-03 15:22:19 - last edited 2021-01-03 21:26:25

@RajaIndra That is a 3way switch.

You would need to use the HS210 to replace that if you have a neutral in the box(the white on the switch is not the neutral).

Check the other 3way switch that controls this circuit and see if that box has a neutral(group of white wires under one wire nut).

Recommended Solution
2
2
#2
Options
1 Reply
Re:How to wire HS200-Solution
2021-01-03 15:22:19 - last edited 2021-01-03 21:26:25

@RajaIndra That is a 3way switch.

You would need to use the HS210 to replace that if you have a neutral in the box(the white on the switch is not the neutral).

Check the other 3way switch that controls this circuit and see if that box has a neutral(group of white wires under one wire nut).

Recommended Solution
2
2
#2
Options