Smart Home Community > Tapo Smart Cameras > anyone connect a C125 to a SCW NVR?
< Tapo Smart Cameras

anyone connect a C125 to a SCW NVR?

anyone connect a C125 to a SCW NVR?

anyone connect a C125 to a SCW NVR?
anyone connect a C125 to a SCW NVR?
a week ago
Tags: #ONVIF / RTSP
Model: Tapo C125  
Hardware Version:
Firmware Version: 1.32

For giggles and grins, I thought I might try to connect my C125 to a SCW NVR
 

It acts like I can configure the camera, but when I save the configuration, the camera is not added.  (says sucess, but the camera is not added)

 

not much else for details.

 

I can display the TAPO using VLC media player using rtsp://10.0.0.8/stream1


I might be able to debug the SCW if I knew another streaming device that I could try the ONVIF protocol.    Thinking if I can make ONVIF protocol work on something else, I might be able to sniff out why it won't work on the SCW.

 

Any ideas appreciated.

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:anyone connect a C125 to a SCW NVR?
Tuesday

  @jnc19610 

Hi,
You can refer to the instructions below to establish the onvif stream with the Tapo C125.
How to view Tapo camera on PC/NAS/NVR through RTSP/Onvif Protocol

You may refer to the following instructions to troubleshoot if you fail to establish the RTSP/Onvif stream, or contact the third-party app's support for assistance.

What can I do if fail to stream the Tapo camera via the RTSP/ONVIF protocol?

Best Regards

>> What to do if the Detection feature is not working on the TP-Link Camera. >> Enhance Video Clarity: Troubleshooting Tips for Improving Camera Video Quality. >> General questions about the TP-Link camera's Pan & Tilt feature.
  0  
  0  
#2
Options
Re:anyone connect a C125 to a SCW NVR?
Yesterday

Hello Solla-topee,

 

I was able to get the C125 to connect to Agenda DVR (Agent).    So, I do understand how to make that work.

 

Still stuck on trying to connect to an SCW DVR.     I'll keep trying, but my thought are, additional parameters are needed to connect to SCW, and there is no place to input them in their browser interface to the DVR.   

 

Anyways, thanks for the idea.   It did work, but it's not my real goal to use that server based dvr (Agent).

 

  0  
  0  
#3
Options
Re:anyone connect a C125 to a SCW NVR?
Yesterday

  @jnc19610 

Hi,
Thank you for your attempt. In your situation, you may contact the SCW DVR support for further assistance.
Best Regards

>> What to do if the Detection feature is not working on the TP-Link Camera. >> Enhance Video Clarity: Troubleshooting Tips for Improving Camera Video Quality. >> General questions about the TP-Link camera's Pan & Tilt feature.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 251

Replies: 3

Tags

ONVIF / RTSP
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.