Forums/
Deco
2025-05-13 02:49:34
@alams154 As it turns out, there is a way to downgrade. See the help article How to use firmware recovery if the Deco become brick | TP-Link. I downgraded to 1.2.9 (and setting "Smart DHCP" to...
1HELPFULS
Forums/
Deco
2025-05-06 17:32:39
@alams154 For my units, the app has a settting "Ignore Ping from WAN" which is enabled by default. It shows up under the "Internet Connection" option. I would assume that disabling it would solve...
0HELPFULS
Forums/
Deco
2025-05-06 12:52:12
@alams154 Check your DHCP setting. For whatever reason, on my units, DHCP defaults to ENABLED when switching to Access Point mode. This was the case when I bought the units and still the case with...
0HELPFULS
Forums/
Deco
2025-05-06 11:39:11
This warning is given for this version: "This version upgrade is irreversible and you cannot downgrade to the previous firmware after the upgrade." So I didn't try. Is it still possible to downgrade?...
0HELPFULS
Forums/
Deco
2025-04-29 14:08:59
@billmccl I had a similar problem with my X5000 units in Access Point. Check the DHCP server setting. For some reason on my units, DHCP is left enabled when switching to Access Point mode. Disabling...
1HELPFULS
Forums/
Deco
2025-04-19 17:38:16
I was running 3 X5000 Decos in Access point mode for over a year. Yesterday, I decided to update the firmware. Result: main deco turns red then green then red - repeats every few minutes. When green,...
3HELPFULS