Forums/
Deco
2021-01-26 17:12:55
@bmanz This should be the setup if the ground floor has the main Deco: __Deco (top floor) / modem > main Deco > switch >/ \ \__Deco (basement) If that is the case, it may be the port of the Deco, the...
0HELPFULS
Forums/
Wi-Fi Routers
2021-01-26 17:06:53
@darkoS I would also make sure the 2.4G and 5G are named differently. If it is not too much of a pain you could also try renaming your wireless network to something completely different.
0HELPFULS
Forums/
Access Points
2021-01-26 17:03:25
@gtboeker Test the cable coming from the router to the internet port of the 841N with a wired computer, then swap that cable with the one being used going to the LAN port of the 841N. See if one of...
0HELPFULS
Forums/
Access Points
2021-01-26 16:50:33
@dmi You posted in our business forum, I think you are assuming you posted here in the home products forum. It has not been deleted or hidden of any sort as you can view it here:...
0HELPFULS
Forums/
Kasa Smart Plugs
2021-01-26 16:45:12
@Mani_78 If you go into the settings for the Kasa app, then "Location and Time", if you manually set a location in the US does that help you install them? Since the plug has US firmware it will only...
0HELPFULS
Forums/
Kasa Smart Switches
2021-01-26 16:37:08
@Kathie68 If the HS200 is installed in a single-pole double-throw it will cause the lights to flash. The HS200 is designed for a single-pole single-throw. If you happen to have another outlet that...
0HELPFULS