Forums/
Deco
2020-12-15 18:40:11
@scorching If the LED lights are blinking red it could be indicating it is not receiving an IP from a nearby Deco unit. You could try swapping one of the satellite nodes with the main node, another...
0HELPFULS
Forums/
Deco
2020-12-15 17:59:47
@Urdy Make sure the connected device is set to DHCP, and not static. You then reserve the IP this way in the Deco app: https://www.tp-link.com/us/support/faq/1795/
0HELPFULS
Forums/
Deco
2020-12-15 17:58:22
@mjreilly Setting the QoS to Standard will prevent it from favoring any activity. At the same time making sure the QoS speed reflects your internet speed and is not set to be slower. You also want to...
0HELPFULS
Forums/
Deco
2020-12-15 17:43:31
@Omer1996 Try unplugging the other two satellite units, and disabling the 2.4G to test the main unit on 5G to see what performance you get that way. While all nodes are on, if you were to go in the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-15 16:51:11
@Consolamentum Your issue is likely that the driver is not up to date, users with Intel cards have reported this before. Here is a FAQ that talks about it and shows your wireless card and the version...
1HELPFULS
Forums/
Kasa Smart Plugs
2020-12-15 16:44:24
@Ampgc The switch works by either cutting power or giving power so if you were to physically unplug the lantern, and plug it back in, that is how the smart plugs works. If the device connected to the...
0HELPFULS