TonyOnline
Following: 0Followers: 54
Forums/ Deco
2020-11-19 23:04:19
Re:Deco M5: Address Reservation for Kasa Devices?
@lesliejuancb Thank you for the update. I will follow up to see if that will change.
0HELPFULS
Forums/ Deco
2020-11-19 22:56:57
Re:New network - inside, outside, barn
@jmob Omada is the software used to control the AP units. Since you only have one, you can log into it directly and set it up like a typical access point so I would not both with the controller...
0HELPFULS
Forums/ Kasa Smart Bulbs
2020-11-19 22:51:07
Re:Using a smart switch with smart lightbulbs that have no wiring to a switch
@ChloeS They will talk for sure so after setting up the smart actions, if you were to physically press the smart switch, the light will then turn on. If you wanted the switch to control the...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-19 22:27:23
Re:can firmware upgrade from WPA2 (TKIP) to WPA2 (AES) or WPA3 ? is it on the product roadmap ?
@Celticmist I would reach out to your local support team as firmware is based on region. The RE650 received firmware for the AES option, but have no information regarding the RE450.
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-19 22:24:49
Re:Archer AX20 - 2.4GHz WiFi loses signal often
@typeadesign The sudden loss of signal sounds like maybe something else other than Wi-Fi channels since you scanned that. Have you tried moving the router to another location as maybe an object or...
0HELPFULS
Forums/ Deco
2020-11-19 22:18:18
Re:How to set two routers with Deco
@magicview Both routers use different services/ports so I am thinking that may work. If you were to run the X60 in AP mode does it get internet? Also, since not getting internet to the X60, if you...
0HELPFULS
1244245246...