Forums/
Wi-Fi Routers
2020-09-18 13:29:26
@wildcat0771 Have you tried factory resetting the router and only setting up the TP-Link Cloud ID?
0HELPFULS
Forums/
Deco
2020-09-18 13:23:34
@Tpo It should work. Try testing the second Ethernet cable to make sure that is good like you tested your computer on one of them. You could also try a different port on the main Deco, and also swap...
0HELPFULS
Forums/
Powerline Adapters
2020-09-17 22:56:52
@lewinr The speed you see in the utility is not the real speed, that shows the link rate between two adapters. You would generally get 30 to 40%, but if you add interference from other electrical...
0HELPFULS
Forums/
Wi-Fi Routers
2020-09-17 18:31:29
@nssk979 Remove any saved profile/network for those devices so when they connect it would be as if they are connecting to the network for the first time.
1HELPFULS
Forums/
Wi-Fi Routers
2020-09-17 18:13:12
@JJC Found this on another forum you could try which is to statically assign an IP to the receiver. A dish user mentioned their receiver was grabbing an IP already taken: You can manually configure...
0HELPFULS
Forums/
Powerline Adapters
2020-09-17 18:04:32
@Keith8 The powerline doesn't have a specific requirement for the Ethernet connection so if your USB adapter is able to get network connectivity directly to a switch or router, it should work being...
0HELPFULS