Forums/
Kasa Smart Switches
2020-08-27 16:53:34
@dugtlr Have you tried enabling the 2.4G guest network on the router and connected them to that? I'm wondering if the 2.4G may be getting crowded on your router now.
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-27 16:51:39
@MiniMinute Use a different device such as your smartphone to see if the issue is happening on that. If so, try doing a factory reset on the router by holding the reset for 15 seconds. The three...
0HELPFULS
Forums/
Access Points
2020-08-27 16:40:50
@Helst0rm At the install site did you bypass the switch to the router to see if that worked? The PoE supports af and at as the EAP so that should be fine. On the Netgear switch are you able to...
0HELPFULS
Forums/
Deco
2020-08-27 16:11:40
@GPeeps4 Yes, you can leave your AT&T device alone if you want. Connect the S4 and set it up normally. What you will have is the S4 wireless network, and the AT&T network. What would be recommended...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-27 15:16:33
@802GreenMtnBoy Have you noticed any pattern that would trigger it? For example, does it tend to happen at a certain part of the day? Were certain things disconnected say the VPN or gaming devices to...
0HELPFULS
Forums/
Kasa Smart Switches
2020-08-26 20:52:40
@Dankees I would recommend reaching out to support to see if it could be an issue with the HS200 itself.
1HELPFULS