Forums/
Wi-Fi Routers
2020-08-25 15:00:03
@backslashV Upload the following firmware: link Once that is done, try the same suggestions you mentioned earlier to see if you see a difference in speed. Another suggestion would be to set the...
0HELPFULS
Forums/
Deco
2020-08-24 22:34:59
@Antler If you were to connect your laptop directly to the Synology NAS are you able to log into it? While your laptop is on the mesh network, is your laptop able to ping any other device? What the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-24 22:26:27
@DannyBoi The reason why it is happening is the USB 3.0 is causing interference to the 2.4G. Here is a FAQ that talks about it and how to address it: link
0HELPFULS
Forums/
Deco
2020-08-24 21:39:12
@BenLin 1. I do not believe you need to, possibly if you are starting to notice a slowdown on the network. There is not a schedule for auto reboot. 2. Yes, the main node is what distributes the IP...
0HELPFULS
Forums/
Deco
2020-08-24 21:23:27
@Guayaco36 Please provide the exact version and build your Deco is using. In the app go to more > update Deco.
0HELPFULS
Forums/
Deco
2020-08-24 21:19:26
In order to get from 1.2.x to 1.4.0 you will need to use a utility below. This method is needed as the browser access is not enabled in 1.2.x. After this update, you would not need to use this...
0HELPFULS