Forums/
Deco
2020-07-06 17:08:04
@MaxSwole No, so far the M9 v1 got the update, but not yet for the v2.
0HELPFULS
Forums/
Range Extenders
2020-07-06 16:48:14
@MangroveMike The relation would be the same characters in the MAC so it likely is. You could also try doing a constant ping to the IP address, then turn off the device to see what it really belongs...
0HELPFULS
Forums/
Apps
2020-07-02 23:01:22
@Wizard_of_Uz I would restart the entire Deco system, see if that still happens. Test the remote and local connection meaning have your phone on Wi-Fi or cell to see if it happens in both instances....
1HELPFULS
Forums/
Deco
2020-07-02 22:51:41
@ImaginaryTango If it is red then it is not getting an IP address. So if the Deco is too far to get a wireless signal and the wired connection is not working you will get that. You could try swapping...
0HELPFULS
Forums/
Deco
2020-07-02 22:29:34
@EastNeverDie Try reposition the slave closer to the main Deco. If the slave is only turning red try swapping with the main Deco. If the main Deco is also turning red then swap the Ethernet cable to...
0HELPFULS
Forums/
Deco
2020-07-02 22:12:00
@PDXJD The P9 will probably not utilize the powerline backhaul and just stick with the Wi-Fi backhaul due to the surge protector. So they will pretty much work as if they were M5s.
0HELPFULS