TonyOnline
Following: 0Followers: 54
Forums/ Wi-Fi Routers
2020-07-01 18:20:08
Re:No admin access to working Archer A7
@Sean_Darcy Connect to the A7, and look at the network information of the phone. See what your IP address is or see what the gateway address is showing. Once you have that, open your phone browser,...
0HELPFULS
Forums/ Deco
2020-07-01 18:00:07
Re:Deco X60, powerline adapter, VOIP phone
@steelpot The first node operates just like a typical router so if you are not having a network connection, disconnect the VOIP phone from the second node, and connect a computer. If the computer...
0HELPFULS
Forums/ Deco
2020-07-01 17:57:18
Re:Connection to 3rd Deco M9 Is Flakey
@ImaginaryTango The backhaul switches automatically so if Decos are wired that will always take preference over Wi-Fi. If the Deco units are connected together via Wi-Fi, when a wired backhaul is...
0HELPFULS
Forums/ Deco
2020-07-01 17:52:26
Re:Deco P9 looses connection with router
@PieterP Look at the LED lights to see if you can see what may be going on. If the slaves units are turning red and the main is green the slaves may be too far. If the main is turning red, the modem...
0HELPFULS
Forums/ Kasa Smart Switches
2020-07-01 17:49:44
Re:HS210 Flashing Indicator
@Craig2 If that second switch is on the same circuit as the first HS210, then hold the button that turns on and off the light for 5 seconds. That should cause the Wi-Fi light to turn red, then turn...
0HELPFULS
Forums/ Powerline Adapters
2020-07-01 17:45:28
Re:can I buy just a "slave" unit for a TL-WPA8630
@genius21 You would need to get the entire set. Unfortunately, we do not sell them individually.
0HELPFULS
1536537538...