Forums/
Deco
2020-06-19 22:50:13
@Atomsk Disconnect the two slaves, and test the speed on the main Deco only, what speeds do you get? Manually set the QoS speed to something like 1000 Mbps, and leave it on standard. Do not put any...
0HELPFULS
Forums/
Wi-Fi Routers
2020-06-19 22:43:26
@Mario_V If having two Xbox systems, one has issues and the other does not I would focus on the Xbox. You could swap the Xbox locations to see if it is a distance issue. If the issue follows the Xbox...
0HELPFULS
Forums/
Wi-Fi Routers
2020-06-19 22:34:47
@StevenJay Thirty feet may seem close but every environment is different. Disable smart connect, and test out the 5GHz band, that may perform better as the 2.4GHz may be getting interference.
0HELPFULS
Forums/
Wi-Fi Routers
2020-06-19 22:33:09
@user_jw21 Go into the wireless settings, enable the AP isolation for 2.4GHz, save it, then disable it and save it again. You should still be able to see any device connected to any of the wireless...
0HELPFULS
Forums/
Powerline Adapters
2020-06-19 22:19:32
@CJTG If you are not seeing the Ethernet LED light turn on when connecting the cable I would swap the Ethernet cable. If the powerline devices are plugged and paired you should have two LED lights, a...
0HELPFULS
Forums/
Wi-Fi Routers
2020-06-19 22:06:29
@bmontena1 I would recommend setting up the router as an access point where the Ethernet cable will go from the LAN of the main router to the WAN of the A7 (Ethernet must stay connected). You will...
0HELPFULS