Forums/
Range Extenders
2020-06-05 17:24:17
@sebastia.net You do not need to change any configuration. I would recommend factory defaulting the extender first by holding the reset for 15 seconds after it has already booted up. The only thing...
1HELPFULS
Forums/
Kasa Smart Plugs
2020-06-05 17:20:49
@Aimytran723 What is the model of the router? Try verifying the wireless password you set up for the smart plug is the right one for your network by forgetting and connecting back to the network on...
0HELPFULS
Forums/
Deco
2020-06-05 16:24:59
@scotsman Have you tried to DMZ the M4 to see if the SMB router may be blocking anything? Or is an IP getting to the M4 at all?
0HELPFULS
Forums/
Deco
2020-06-05 16:16:13
@DRT What notifications were you referring to? You want to check the IP and ports the NAS system is using. If the NAS was reachable from the internet then ports should have been forwarded. Look at...
0HELPFULS
Forums/
Range Extenders
2020-06-04 23:07:45
@lucas70 The extender will only connect to a brand that is available from the main router. So if your router only has 2.4GHz only the extenders 2.4GHz will connect, and not the 5Ghz. Another way to...
0HELPFULS
Forums/
Deco
2020-06-04 23:05:32
@smatlock I would look at swapping the Ethernet cable being used from the main Deco to the modem. If the drops happen in a pattern where you can predict them, you can look to have a computer directly...
1HELPFULS