Forums/
Deco
2020-06-04 18:18:16
@Czuz You will need to use the Deco app in order to manage the Zigbee devices.
0HELPFULS
Forums/
Wi-Fi Routers
2020-06-04 18:16:28
@poqh Try testing with all available channels rather than auto. If you have no AX devices try switching the mode to a/n/ac to see if you get any difference in speed.
0HELPFULS
Forums/
Deco
2020-06-04 18:02:32
@Nico_B86 SIP mainly refers to using VOIP phones which tries to help get traffic to devices behind a NAT. If you are not using VOIP phones then it would not matter if it is enabled or disabled. With...
0HELPFULS
Forums/
Deco
2020-06-04 17:18:56
@Muggy I would go for the P9 since it supports HomePlug AV2 which does a better job sending the signal through your wiring then HomePlug AV (Deco P7).
0HELPFULS
Forums/
Wi-Fi Routers
2020-06-04 17:13:20
@Avazjon Drivers are needed in order for the UE200 to operate which the router can not install/run do so likely it will not work.
0HELPFULS
Forums/
Wi-Fi Routers
2020-06-04 16:59:58
@AlexLik Are you able the enable the guest network, and only have the 2.4GHz band enabled? Then having the guest network talk to your main network. Then set up the WR802N on the 2.4Ghz only network?
0HELPFULS