Forums/
Wi-Fi Routers
Monday
@jzchen Have it working now. What I discovered along the way: 1. When totally lost internet access when set XB8 to bridge mode attached Mac directly to XB8 and used the Xfinity IOS app to reset the...
2HELPFULS
Forums/
Wi-Fi Routers
Sunday
@Caprichoso I had been planning to replace the RV340 when swapping the XB8 with a newer modem with 10Ge support. Removed the RV340 from the chain to simplify things. When the XB8 goes into bridge...
0HELPFULS
Forums/
Wi-Fi Routers
Sunday
@jzchen 1. The Comcast XB8 modem doesn't have any 10 GbE ports By connecting all of my 10 GbE devices via the switch they are able to communicate between themselves at 10 GbE speeds. 2. WiFi 7...
0HELPFULS
Forums/
Wi-Fi Routers
Sunday
The problem with that is then internet access isn't protected by the Cisco firewall. Is there any other way? Edited: won't work as the Comcast XB8 modem doesn't have any 10 GbE portsl
0HELPFULS
Forums/
Wi-Fi Routers
Sunday
Thanks for the replies. Part of the issue is I don't completely understand what the LAN address is. The modem has both IPV4 and IPV6 mac addresses. It also has an IPV4 address of 10.0.0.1 Put the...
0HELPFULS
Forums/
Wi-Fi Routers
Saturday
@Caprichoso Thanks. Not sure what you are saying. I know how netmasks work. Yes, the GE800 does access the internet via the 10.0.0.1 gateway. The problem is that I can't change the DHCP server to...
0HELPFULS