
xPON
I've updated to latest firmware, but can't run these commands: flash set OMCI_FAKE_OK 1 flash set OMCI_OLT_MODE 1 flash set GPON_PLOAM_PASSWD 0123456789 flash set GPON_SN XXXXXXXXXXXXXX flash set GPON
0Helpful
3455Views
I would like to get one feature added in the next global update, which also fixes the IPv6 Android 15 Bugs as well as MAC Clone speed limits. IPv6 VoIP mode is there, but it's not available on the sai
IPv6VoIP
11Helpful
329Views
I installed this device in my house, put fiber directly on it, it registered without issues. But I noticed a odd issue: Any download is always capped at 50Mb/s (my plan is 500Mb/s for both downloads a
19Helpful
6050Views
Hi There, Kindly provide me the latest & stable Firmware Update file to support XPON for the TP-Link XX530v(IN) PON Router. Thanks.
XX530vFirmware Update
8Helpful
2403Views
Hello, everyone! Due to changes after Android 15, there have been new updates regarding energy saving, which has caused issues in ipv6 connectivity due to low RA Lifetime for IPV6. Devices with Androi
IPv6Network ConnectivityAndroid 15
By
Drdiamond
· Latest post a week ago
by GlaisneWalsh
3Helpful
466Views
I'm facing a weird issue with my TP-Link XC220-G3V. I purchased it to replace my dead ONT. I configured it, enabled VLAN and was able to access the internet. After I switched it off for the day and tu
Network Connectivity
2Helpful
214Views
Hi. I had an older tp link router with a very similar interface, and that router had an UP and DOWN Kbps indicator in the interface, as well as a integrated speed test, but this newer one (XX530v) doe
By
Prakarhta
· Latest post 2 weeks ago
by faniquiter
0Helpful
1405Views
