NC450 goes offline on WLAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Camera Name: NC450 2.0
Model: NC450 2.0
Firmware: 1.5.0 Build 181022 Rel. 3A033D
Hello to all!
Like many others in this Forum, we have strange connectivity issues with the NC450 V2.
My setup:
We need the camera connected to WLAN (Wifi), to connect via Ethernet cable is not an option.
After initial setup the camera via tpCamera App (Iphone), with cable pluged in, i changed from DHCP to Static IP. Pulled the cable and WLAN is connected at Rate 89%.
No Cloud Settings taken, we don't need it, the cam should only work in the local LAN/WLAN.
Login via Browser Firefox (64.0.2) and Live View is ok.
Installed TP-Link CameraControl in Windows 10. Login - all works fine.
After about 30 - 40 mins the TP-Link Camera Control shows "Connection Error".
tpCamera Version 3.1.4 App (Iphone) shows the NC450 "Offline".
The LED on the NC450 is constant green.
After powercycle, I upgraded the Firmware from 1.3.4 to 1.5.0.
Then i reset to "factory default settings" and setup the camera new.
All worked!
After about 30 - 40 mins. - Connection Error on TP-Link Camera Control. tpCamera on IPhone shows "offline" again.
Not able to Login via Firefox etc. The Camera Website is not reachable. Not able to ping the IP Adress.
The LED on the NC405 is constant green.
After power off the camera and turn on again, it works again... for a while.
Is there any solution for this ?
Otherwise we would send this thing back and try another manufacturer.
Regards,
Chris
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
replied to you on another thread. https://community.tp-link.com/en/home/forum/topic/159541?replyId=354620
- Copy Link
- Report Inappropriate Content
Hi, can I please also email me thelink and guide on how to downgrade the firmware? Am also having the same problem with constant going offline. Thanks
- Copy Link
- Report Inappropriate Content
Hello, cause the latest 1.5.1 firmware has been released, you can install this firmware to give it a go.
Instructions are as below:
https://www.tp-link.com/support/faq/1972/
https://www.tp-link.com/support/faq/1572/
Any updates, please let us know.
Nice day.
- Copy Link
- Report Inappropriate Content
Hi Kevin, thanks so much for your reply. Will try out and let all know. Have a great day ahead
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Timber floors are the core beauty for many houses. But after a while their bauty seems to decay. This problem can be solved if you just try timber floor polishing. Polishing makes the surface of the timber floor smootha and shiny. taking it back to its former beauty.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 15830
Replies: 59
Voters 0
No one has voted for it yet.