Early Access [Closed] Archer BE805 Pre-release Software Enhances the Overall System Stability
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update on Aug 11th, 2025:
The official version 1.3.0 Build 20250710 is being gradually released. Users can check for updates via the router's web interface or through the Tether App to install the latest version manually.
If you cannot find the latest version, please download the firmware from the official website and upgrade it manually:
https://www.tp-link.com/support/download/archer-be805/v1/#Firmware
We will manually lock this post to better focus on discussions regarding the new firmware. We also encourage all users to upgrade to the latest firmware for testing and to provide feedback.
--------------------------------------------------------------------------------
Update: We're pleased to offer a new pre-release version 1.2.4_Build 20250724 for Archer BE805 for testing in your real network. This update aims to enhance overall system stability and address some issues reported by our users. We strongly recommend upgrading to this version to improve your experience.
This Article applies to:
Archer BE805 V1
Modifications and Improvements
This pre-release version of firmware includes all modifications and improvements from the official version 1.2.2, along with additional changes as follows:
New Features/Enhancements:
1. Added VPN kill switch feature.
Bug Fixes:
1. Fixed the bug that video can still be played after bedtime expires.
2. Fixed the bug that iPhone have a slow speed under specific conditions.
3. Improved the stability and security of system.
4. Improved the stability and performance of wireless.
Firmware Download:
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(2) This official firmware for Archer BE805 V1 can be applied to all versions (EU/US/JP/TW/etc).
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Direct Firmware Download Link
| Archer BE805_V1.0/V1.20 | Archer BE805_V1.0&V1.20_1.2.4_Build 20250724 (Updated version of Pre-release Firmware) |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Toperr wrote
Kevin_Z wrote
Toperr wrote
Hi thanks.. I am trying this new beta firmware.. Having 4 ssids for 2.4,5ghz, 6ghz and MLO.. Currently MLO (2.4+5+6ghz) is stable, so far it works nicely as the speeds are somehow ard 6ghz channel speed or higher. .. However if I connect to ssid of 5ghz or 6ghz and come back to mlo ssid.. The mlo ssid speed is very slow.. Like 2.4ghz. I need to reboot the router and forget all other ssid except MLO one to gain back the speed. Using speedtest to test speed.
Still feel MLO (2.4+5+6) sometime the speed strucked at 2.4ghz speed.. Now using MLO(5+6) only
Hello @Toperr, thank you for testing out the new pre-release firmware for the BE805 and providing your valuable feedback.
Regarding the MLO Network speed concern, could you please specify the device(s) you're using to test the MLO speed?
Please disable the 2.4G band for the MLO Network and test the speed again.
BTW, what is the network bandwidth you paid for your internet?
@Kevin_Z yes I already disabled the 2.4 for MLO.. Now only using MLO (5+6ghz) with ZTE Z70 ultra phone. Only device I have that support MLO. Mine internet plan is 6gbps.
Hello @Toperr, I discussed with the engineering team, and it appears that you've already been in contact with them. I suggest you continue discussing with them and try to work it out.
- Copy Link
- Report Inappropriate Content
@Kevin_Z sure thank u
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
PandaJas wrote
Hi Performance test connected to 6G only using S25Ultra. Managed to archieve 800-900Mbps.
@PandaJas Thank you for clarifying.
To assist and figure this out efficiently, I've forwarded your case to the TP-Link support engineers, who will contact you with your registered email address later. Please keep an eye on your email inbox for a follow-up. Thank you.
- Copy Link
- Report Inappropriate Content
I'm pleased to inform you that we are preparing to release a new official firmware update for the Archer BE805 in a few weeks. Our development team has provided early access to this new firmware. I hope you can upgrade and install it on your BE805 and let me know how it improves your network performances or fixes the reported concerns.
You can get the direct download link from my original post:
Archer BE805 Pre-release Software Enhances the Overall System Stability
Thank you very much, and I look forward to your feedback.
- Copy Link
- Report Inappropriate Content
Hi.. Unable to flash the firmware.. It show " upload error."
- Copy Link
- Report Inappropriate Content
Upgraded to firmware 1.2.4 for my BE805.
Speed for 6G is able to reach 9XXmbps which is near my ISP link speed of 1gbps.
Nice.
Can I confirm MLO is able to work in easymesh mode as my BE805 is currently configured as satellite to my BE800 for this current firmware?
It seems like if I connect to MLO ssid .. my phone will only connect to BE800 whereas if connect to 6g ssid .. my phone can connect to either be805 and be800.
- Copy Link
- Report Inappropriate Content
PandaJas wrote
Upgraded to firmware 1.2.4 for my BE805.
Speed for 6G is able to reach 9XXmbps which is near my ISP link speed of 1gbps.
Nice.
Can I confirm MLO is able to work in easymesh mode as my BE805 is currently configured as satellite to my BE800 for this current firmware?
It seems like if I connect to MLO ssid .. my phone will only connect to BE800 whereas if connect to 6g ssid .. my phone can connect to either be805 and be800.
@PandaJas Thank you very much for your feedback. I'm happy to see that the 6G speed is now good.
EasyMesh currently doesn't work between MLO Networks, and it only works between the main network. I believe EasyMesh will be optimized in the future.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
SG version, 1.2 hardware.. Yr guy told me is for eu and us model only.. U have the sg version firmware?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4188
Replies: 52
Voters 0
No one has voted for it yet.