Video Exploring Two Pathways: The Wall Plate EAP Installation Guide
Hi All,
This post provides a comprehensive guide on installing Wall Plate EAPs using two different methods. We hope that this information proves helpful to those who may need it. In this guide, we will use the EAP615-Wall and EAP655-Wall as examples. The main difference between the two methods is that the EAP655-Wall requires the detachment of an additional EAP faceplate compared to the EAP615-Wall.
For EAP615-Wall:
1. Detach the faceplate of the junction box with a Phillips screwdriver.
2. Insert the enclosed screws and tighten them with a Philips screwdriver to secure the mounting bracket.
3. Connect the Ethernet cable inside the junction box to an RJ45 plug, and then connect the cable to the ETH0 (PoE IN) port. Position the Ethernet cable to ensure it is not strained.
4. Attach the EAP to the mounting bracket by aligning the two mounting studs on the mounting bracket with the large openning of the slots on the EAP, and then press and slide the EAP down until it locks into place.
If you want to learn more details, here is an installation video just for your reference: https://www.youtube-nocookie.com/embed/Uy7exY6F7ko
For EAP655-Wall:
1. Detach the faceplate of the junction box with a Phillips screwdriver.
2. Detach the faceplate of the EAP with a screwdriver.
3. Connect the Ethernet cable inside the junction box to an RJ45 plug, and then connect the cable to the UPLINK+PoE port. Position the Ethernet cable to ensure it is not strained.
4. Insert the enclosed screws and tighten them with a triangular screwdriver to secure the mounting bracket.
5. Press the faceplate of the EAP back into position.
If you'd like to learn more details, we have an installation video available for your reference: https://www.youtube-nocookie.com/embed/QdBgpAJ23fA
Additionally, we have a comparison video showcasing the two methods of Wall Plate EAP installation, shared by one of our enthusiastic customers: https://www.youtube.com/watch?v=xHY6YWERhgk
Note:
1. The installation guide for EAP115-Wall, EAP230-Wall, and EAP650-Wall is the same as that for EAP655-Wall.
2. Similarly, the installation guide for EAP225-Wall and EAP235-Wall is the same as that for EAP615-Wall.
3. If you would like to access the complete installation guide for a specific EAP, please visit the Official TP-Link website and navigate to the Support page. There, you can find the Installation Guide listed in the Manual section.
Recommended Threads
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Essence Posts Summary (Newbie Must-See)
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
How to Upgrade or Downgrade the Firmware of Omada EAPs
Feedback
If this was helpful, welcome to give us Kudos by clicking the upward triangle below.
If there is anything unclear in this solution post, please feel free to comment below.
To submit a new different issue, please Start a New Thread for better assistance.
Thank you for your support and contribution to TP-Link Community!