Hello, I built a small TP-Link based network. All settings are offline, without Internet. There is no connection on the WAN router interfaces. I setup static IP for all the network equipment, VLAN int

I have a four EA225 AP's setup on a management VLAN 192.168.200.0/24 (as well as three JetStream switches, an ER605 router and OC200 controller). The OC200 is on a static IP (192.168.10.10) and the ot

Sorry for the basic question but I am struggling to Connect 2 networks and being able to ping between them and devices on each network. I have a broadband network 192.168.1.x and an internal process c

I have 3 WAN connections. WAN and WAN/LAN1 are each about 40 Mbs and WAN/LAN2 is about 14 Mbs. I have specified load balancing on WAN and WAN/LAN1 and link backup from primary WAN: WAN WAN/LAN1 to WAN

I'm having the worst time setting up port forwarding for this router. WAN is a static IP, primary DNS/Gateway are 192.168.1.85, I am assigning the ER7206 to 192.168.1.1 LAN is set to 192.168.7.1, DHCP

I wish to replace my existing Unifi Dream Machine router with the TP-Link ER605 router. Is it possible and are their any information on how to do it? I am using Unifi access points and switches. Any i