Marcia please help downgrade firmware to Archer VR600(AU)_V2_Beta
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi Marcia,
My device was running fine on Archer VR600(AU)_V2_Beta firmware and was happily using the wireless schedule but after updating to firmware version Archer VR600(AU)_V2_190123 the wireless schedule is no longer available in the same way.
Previously I could manage wireless schedules for both 2g and 5g networks separately but after the firmware upgrade this is no longer possible.
I cannot find any option for tftp recovery so you will need to provide me with a custom downgrade file or else I will be seeking an RMA return of this device as it no longer functions as required.
Regards,
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, thanks for your waiting.
I confirmed with our engineer that the Archer VR600 supports TFTP firmware recovery. While unlike Archer C7, the WPS led won't turn on.
You can read the story to get the instruction: https://community.tp-link.com/en/home/stories/detail/582
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
Thanks Marcia,
As the TFTP recovery guide you refer to is for a different model, can you please request from your engineer the correct procedure, IP address and firmware file name to use.
TFTP INSTRUCTION ARCHER VR600 V2
Eg: Power on while holding down reset button. Release reset button after 10 seconds.
IP Address: 192.168.0.66/24
Firmware: wdr4300v1_tp_recovery.bin
TFTP will now flash
I have previously tried to initiate TFTP and as you say there was no flashing light indicator.
But I also ran Wireshark and it didn't pickup any TFTP requests coming from the device either?
I will need more precise instruction please.
Regards,
- Copy Link
- Report Inappropriate Content
Hello Marcia??
- Copy Link
- Report Inappropriate Content
Below is the download link of the firmware recovery guidance.
http://support.tp-link.com/f/95399a1ca9/?dl=1
For the firmware, you can rename it as ArcherVR600v2_tp_recovery.bin.
May it help and have a good day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@MoulDTR no of course it didn't work they don't listen here it's a waste of time.
I did the Wireshark too it's not picking up any tftp requests
- Copy Link
- Report Inappropriate Content
@Kevin_Z please repost the firmware as the link is broken
- Copy Link
- Report Inappropriate Content
@Brent0n Hi i am struggling to put it into tftp recovery too? I cant see anything on wireshark. Has anyone been luckier than I am?
- Copy Link
- Report Inappropriate Content
@Zakii no luck with TFTP contrary to the advice from Tp-Link staff there is NO TFTP mode for this device
- Copy Link
- Report Inappropriate Content
Im more alarmed theres is no TFTP recovery. I regard it highly as it assures Ill always manage to unbrick the router. I cant believe how clueless of their own product
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 5651
Replies: 26
Voters 1
