Home Network Community > Range Extenders > How to turn off DHCP in re200 V3 access point mode?
< Range Extenders

How to turn off DHCP in re200 V3 access point mode?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12345

How to turn off DHCP in re200 V3 access point mode?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to turn off DHCP in re200 V3 access point mode?
How to turn off DHCP in re200 V3 access point mode?
2020-02-08 14:42:05 - last edited 2022-07-25 01:52:54
Model: RE200  
Hardware Version: V3
Firmware Version: Latest

I need to turn off the dhcp in Re200 V3 in access point mode. How do i do that?

Thx yair

  2      
 
  2      
 
#1
Options
1 Accepted Solution
Re:How to turn off DHCP in re200 V3 access point mode? -Solution
2020-11-20 06:22:38 - last edited 2020-12-01 07:53:29

@Adrian_M 

Hello,

Sorry for the delay.

there is the related firmware:

RE205 v3: https://static.tp-link.com/2020/202010/20201022/RE205v3_20201020.zip

 

Re300 v1: https://static.tp-link.com/2020/202011/20201110/RE300_V1_201110.zip

 

Re305 v3: https://static.tp-link.com/2020/202011/20201119/RE305_v3_201114.zip

 

Re200 v4: https://static.tp-link.com/2020/202006/20200612/re200v4_eu-up-ver1-0-6-P1[20200608-rel40529].zip

 

RE200 V3: https://static.tp-link.com/2020/202010/20201029/re200v3_eu-up-ver1-1-1-P1[20191127-rel47933].zip

 

How to update the firmware: https://www.tp-link.com/support/faq/1406/

 

Please note: the official firmware would be released later.

Please feel free to update here with further improvement.

 

Thank you very much!

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  4  
  4  
#30
Options
45 Reply
Re:How to turn off DHCP in re200 V3 access point mode?
2020-02-10 05:38:42

@Yairkoren88 Normally, there is no necessary to manually disable the DHCP server on RE200, once it connect to your router and detect the DHCP server on your router, then it  will turn off its own automatically. And all the clients connect to RE200 will obtain IP address from the router DHCP server.

 

but maybe you could share why you need to disable the DHCP on RE200. smiley

  0  
  0  
#2
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-02-10 07:07:06

@Selin 

Thank you for the answer. I want to disable it because in later version of RE200, V2, i once didn't turned it off and than the whole network was a mess because the DHCP was on.I just wanted to make sure it doesn't happen again.

Do you know a way to disable it?

  0  
  0  
#3
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-02-11 09:15:14

@Yairkoren88 

 

Hello, when you switch the RE200 to the access point, you can login to the web UI and go to settings-LAN settings page to verify whether you can find the DHCP server option.

 

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-04-05 11:19:19

@Kevin_Z 

hi, there is no opton even on ap mode.

i have the same problem, 

some times , because for some reason, the dhcp offer by re200 seems to trouble the network.

 

i should be a firmware thing, it should have that option.. tp-link should not assume that there is no problem with the dhcp option being auto mode.

 

jimmy

  0  
  0  
#5
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-04-09 08:53:36 - last edited 2020-04-09 15:50:14

@Yairkoren88 

 

It is very annoying working as access point mode and with fixed IP-address, every 30 seconds RE200 v3 is doing DHCPDISCOVER. Why?

DHCP logs are unuseful with so much rubbish.

Please: fix it.

 

Apr  9 10:40:58 dnsmasq-dhcp[3067]: 1537053207 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:40:58 dnsmasq-dhcp[3067]: 1537053207 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:41:16 dnsmasq-dhcp[3067]: 4166641925 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:41:16 dnsmasq-dhcp[3067]: 4166641925 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:41:40 dnsmasq-dhcp[3067]: 2460327506 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:41:40 dnsmasq-dhcp[3067]: 2460327506 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:41:58 dnsmasq-dhcp[3067]: 1034325881 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:41:58 dnsmasq-dhcp[3067]: 1034325881 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:42:22 dnsmasq-dhcp[3067]: 262825730 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:42:22 dnsmasq-dhcp[3067]: 262825730 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:42:40 dnsmasq-dhcp[3067]: 331387973 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:42:40 dnsmasq-dhcp[3067]: 331387973 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:43:05 dnsmasq-dhcp[3067]: 2492364320 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:43:05 dnsmasq-dhcp[3067]: 2492364320 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:43:23 dnsmasq-dhcp[3067]: 3377124960 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:43:23 dnsmasq-dhcp[3067]: 3377124960 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:43:47 dnsmasq-dhcp[3067]: 3658936324 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:43:47 dnsmasq-dhcp[3067]: 3658936324 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:44:05 dnsmasq-dhcp[3067]: 3809116259 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:44:05 dnsmasq-dhcp[3067]: 3809116259 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:44:29 dnsmasq-dhcp[3067]: 2619358053 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:44:29 dnsmasq-dhcp[3067]: 2619358053 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:44:47 dnsmasq-dhcp[3067]: 812184856 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:44:47 dnsmasq-dhcp[3067]: 812184856 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:45:12 dnsmasq-dhcp[3067]: 66508365 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:45:12 dnsmasq-dhcp[3067]: 66508365 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:45:30 dnsmasq-dhcp[3067]: 3604490053 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:45:30 dnsmasq-dhcp[3067]: 3604490053 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:45:54 dnsmasq-dhcp[3067]: 1069003343 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:45:54 dnsmasq-dhcp[3067]: 1069003343 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:46:12 dnsmasq-dhcp[3067]: 431414291 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:46:12 dnsmasq-dhcp[3067]: 431414291 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:46:36 dnsmasq-dhcp[3067]: 1946959875 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:46:36 dnsmasq-dhcp[3067]: 1946959875 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:46:54 dnsmasq-dhcp[3067]: 1943509617 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:46:54 dnsmasq-dhcp[3067]: 1943509617 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:47:18 dnsmasq-dhcp[3067]: 3089033598 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:47:18 dnsmasq-dhcp[3067]: 3089033598 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:47:36 dnsmasq-dhcp[3067]: 1359977562 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:47:36 dnsmasq-dhcp[3067]: 1359977562 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:48:01 dnsmasq-dhcp[3067]: 1614101799 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:48:01 dnsmasq-dhcp[3067]: 1614101799 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:48:19 dnsmasq-dhcp[3067]: 3521302321 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:48:19 dnsmasq-dhcp[3067]: 3521302321 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:48:43 dnsmasq-dhcp[3067]: 1212409122 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:48:43 dnsmasq-dhcp[3067]: 1212409122 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:49:01 dnsmasq-dhcp[3067]: 1722440295 DHCPDISCOVER(eth0) 192.168.1.197 74:da:88:hi:dd:en
Apr  9 10:49:01 dnsmasq-dhcp[3067]: 1722440295 DHCPOFFER(eth0) 192.168.1.197 74:da:88:hi:dd:en
 

 

Besides, my dhcp server is running in a microSD, it should not be writing so frequently, SD will get crashed again.

 

  0  
  0  
#6
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-07-06 11:14:05 - last edited 2020-07-06 11:14:43

@Kevin_Z 

There is no option to disable the DHCP Server on the RE205. I have the same problem with my network. I'm running a Netgear D6300 as my router and DHCP, etc. Whenever I plug one of the RE205s in, my router stops responding. If I wait a minute, remove the LAN cable from the RE205, then plug it back in, the router comes back to life and the WAP works as expected. The RE205 is running the latest firmware, is set with a static IP and is in access point mode. Really need an option to stop it's DHCP discovery process completely, as it is not workable in this state and if there is no fix, I will have to return them and find another vendor.

  1  
  1  
#7
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-07-10 20:55:21

@DylanT Exact same issue here!

  0  
  0  
#8
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-09-09 06:32:25 - last edited 2020-09-09 06:34:02

Hello.

 

i have the same problem

 

Model: RE300
Hardware Version: V1
Firmware Version: 1.0.5  Build 20191114

 

I need to turn off the dhcp in RE300 V1 in access point mode.

 

 

_________________

 

Se activa de forma automatica y no existe manera de desactivarlo

 

El error se genera luego de colocar una IP estatica a la LAN del Acces Point

  0  
  0  
#9
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-09-11 02:21:28

@ELP21 

Good day.

It would be better if you could write in English so that everyone could give some advice to you, thank you!

@DisAppointed231 

Good day,

Sorry for the delay,

Is your range extender RE200(EU)_V3_190731?

And what is the model number of your wireless router by the way?

Could you please provide more details about your current issue so that we could forward your case to our senior engineers.

Thank you very much.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  1  
  1  
#10
Options
Re:How to turn off DHCP in re200 V3 access point mode?
2020-09-16 14:12:28

@Solla-topee I am in the same position, I want to turn off the DHCP server on my RE200, the reason for this is simple. If I ever need to reboot my router the DHCP on the RE200 takes over, then i need to unplug the RE200 just to get my network working. This is soemthing that should be easy to disable but instead it is stuck to on and cannot be disabled.

  1  
  1  
#11
Options
12345

Information

Helpful: 2

Views: 21113

Replies: 45

Related Articles
Extender RE200 access point mode no more than 100MB
1007 0
 RE200 - Access Point Mode - Won't operate when DHCP is disabled
2217 0
Re200 V1 access point not working
143 0
How do I turn off LEDs in Access Point mode?
153 0
RE200 high speed in acces point mode
1557 0
 RE200 access point mode - this setting is for target wifi ?
3944 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.