HS110 offset for sunrise/sunset function
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.HS110 offset for sunrise/sunset function
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi!
Is there any plan to add a configurable offset to the sunrise/sunset function? This is something that other manufacturers already offer. I have a small PV plant and there is always an offset between sunrise and production of electricity.
Thank you!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
eneloop wrote
I already have another question concerning the HS110:
Is the power metering working without wifi connectivity (is the data stored on the device itself)?
Thanks!
Before the plug loses the wifi connection, if it already connected to the wifi successfully and Synchronized to the correct time, the energy monitor will still work without a wifi connection.
Good day.
- Copy Link
- Report Inappropriate Content
Thank you very much for your time and patience.
For the HS100/HS110, only V2 and above on the APP（V3 and above on the product label）supported Sunset/Sunrise Offset；
For more details, please refer to this link:
https://www.tp-link.com/support/faq/2702/
thank a lot and wait for your reply.
- Copy Link
- Report Inappropriate Content
What is the hardware version and firmware version of your HS110?
Please log into the KASA app and go to the schedule page and click add, then please verify whether you can configure offset to sunrise/sunset.
May it help.
- Copy Link
- Report Inappropriate Content
Hardware Version: 2.0
Firmware-Version: 1.5.4
The sunrise/sunset function is working like a charm, what I mean is for example "switch on 1 hour after sunrise" or "switch off 1 hour before sunset".
Thank you!
- Copy Link
- Report Inappropriate Content
Thanks for your reply.
I know your request. For the devices support offset for sunrise/sunset function, there will be an after/before function available to satisfy your needs.
The current HS110 does not support it, while as I know, there will be a firmware released which supports this function. You can wait a while and then update the firmware.
Thanks for your patience in advance.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You are welcome. Please feel free to let us know if you have other questions.
Thank you for your support.
Have a good day!
- Copy Link
- Report Inappropriate Content
I already have another question concerning the HS110:
Is the power metering working without wifi connectivity (is the data stored on the device itself)?
Thanks!
- Copy Link
- Report Inappropriate Content
eneloop wrote
I already have another question concerning the HS110:
Is the power metering working without wifi connectivity (is the data stored on the device itself)?
Thanks!
Before the plug loses the wifi connection, if it already connected to the wifi successfully and Synchronized to the correct time, the energy monitor will still work without a wifi connection.
Good day.
- Copy Link
- Report Inappropriate Content
@Stella.Q Are there any plans to improve the offset function in the kasa app?
I would like to see an offset of more than +-59 minutes, say up to 3 hours (180 mins).
I also have solar panels and they do not generate enough usable power until up to 3 hours after sunrise.
- Copy Link
- Report Inappropriate Content
Thank you, we have noted your request and will keep an eye on similar feedback.
Have a good day.
- Copy Link
- Report Inappropriate Content
Very much interested in offsets greater than 59 minutes as well!
I solved it with IFTTT configured for a different location now, but it is far from optimal. I would like to manage everything in Kasa alone.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2382
Replies: 12
Voters 0
No one has voted for it yet.