Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
| Archer MR600(EU) v2 | supported via the latest official firmware |
| Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 (Beta firmware) |
| Archer MR400(EU) V4.2 | supported via official firmware |
| Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 (Beta firmware) |
| Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 (Beta firmware) |
| Archer MR200(EU) V5.2 | supported via official firmware |
| Archer MR200(EU) V5 | ArcherMR200(EU)_V5_211015 (Beta firmware) |
| Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6500V(EU)V1 | supported via latest official firmware |
| TL-MR6400(EU) V5.2 | supported via latest official firmware |
| TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 (Beta firmware) |
| TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 (Beta firmware) |
| TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 (Beta firmware) |
| TL-MR150(EU)V1 | LTE_GATEWAY_20210108 (Beta firmware) |
| TL-MR100(EU)V1 | supported via the latest official firmware |
| M7450(EU) V2 | M7450(EU) _V2_20220303 (Beta firmware) |
| M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 (Beta firmware) |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z Can I use this firmware given above to upgrade my Archer mr200 v5? I upgraded once from tp-link official website but there's no band locking option even after I upgraded it, plz reply
- Copy Link
- Report Inappropriate Content
Здраствуйте.Archer MR600 v.1.какая beta-прошивка с ручным выбором диапазонов самая свежая (последняя).Их есть 3 штуки,но какая самая последняя не могу разобраться.
- Copy Link
- Report Inappropriate Content
Hi, for the latest beta firmware for MR600(EU) V1, please refer to the following post:
https://community.tp-link.com/en/home/forum/topic/579834
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Солнечный свет Добрый день, подскажите пожалуйста, может уже есть более свежая прошивка beta для устройства MR600 V1?
- Copy Link
- Report Inappropriate Content
mr600 v2 cant lock a band it will automatically chnage between the two band you choose.
thr are times times that the band 1,3 sre being used it was great the download speed was very good , then after an hour it will automatically change to band 1 only and the download speed was very slow.
thr are also a time it used band 3 only. thn repeat
all i want is to lock it to band 1,3 i dont care if it the connection were strong or weak/ slow or fast/ have or don't have.
you can choose band but it will not lock the band you choose.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 146637
Replies: 312
Voters 5
