Hi Kevin..thanks for your reply and for your details "in red" !....but i would like to understand why in this brand the staff make call (in the name) the new version of firmware with low numbers in comparision with the previous one.

According me this fact make crazy everybody that not understand well which is the newer version...what do you think about?

@Kevin_Z 

I have installed the firmware Archer MR200 v4  with the option for band selection and its very helpful. i am now getting a stable internet. 

Wish it get updated to latest official firmware version with onemesh features.

Also wish to have a feature for data limit by day also. currently its by month. 

Thanks and Regards,

Subin Sam Mathew

@Kevin_Z 

Thanks for the beta firmware link! After experiencing several internet disconnection every day I just installed the firmware on my Archer MR600 V1 and chose 2 bands that worked well in auto mode before (20 and 28). Download and upload speeds cranked up by 50% so far (nice!) and I'll wait to see if internet drops again bu I hope not.

I wanted to ask if you had any advices on the band selection?

Here are printscreens of the router when internet was disconnected. Please note that all lights on the device we lit as if it was still working. Power on, Internet light on, 3 bars of network... But it was disconnected. I had to shut the modem down and reboot it manually to get internet back. A reboot on the router's online interface would not do the trick.


 

And here are the details now when it's connected:

Thanks for your help!

TL-MR100(EU)_V1_201016 is removed from the official firmware update!

WHY? please answer....

@Kevin_Z is it safe to use these beta firmwares?

@Kevin_Z  Sir, do we have firmware for MR200 v2 which support Manual Band Selection. Thanks

Kevin_Z wrote

If you have since experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, and you would like to switch the band manually by yourself you can download and install the following beta firmware on your router.

 

Archer MR600(EU)_V1:

https://static.tp-link.com/2020/202012/20201207/Archer_MR600v1_1.1.0_0.9.1_[201204-rel66940]_up_boot_2020-12-04_19.05.35.zip

Note: Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.

 

Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1:

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip

 

TL-MR6400(APAC)_V3: 

https://static.tp-link.com/2020/202004/20200403/LTE_GATEWAYv3_1.2.0_0.9.1_up_boot(200402)_2020-04-02_17.28.07.zip

 

TL-MR6400(EU)_V5:

https://static.tp-link.com/2020/202012/20201208/TL-MR6400(EU)v5_1.1.0_0.9.1_[201113-rel63736]_up_boot_all_2020-12-08_09.38.45.zip

 

Archer MR200(EU)_V5:

https://static.tp-link.com/2020/202010/20201012/Archer_MR200(EU)v5_1.0.0_0.9.1_[200925-rel32374]_up_boot_all_2020-09-30_11.15.13.zip

 

TL-MR150(EU)_V2:

https://static.tp-link.com/2020/202011/20201117/TL-MR150(EU)v2_1.1.0_0.9.1_[200930-rel56894]_up_boot_all_2020-09-30_15.53.06.zip

 

 

*The official firmware has been released for the below models, you can install the latest firmware via the online upgrade or download it from the official website:

TL-MR100(EU)_V1_201016

Archer MR600(EU)_V2

TL-MR6500v(EU)_V1

 

You will get the band selection option on the Basic->Internet or Advanced->Network->Internet page, based on the model of your devices:

Kevin_Z wrote

If you have since experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, and you would like to switch the band manually by yourself you can download and install the following beta firmware on your router.

 

Archer MR600(EU)_V1:

https://static.tp-link.com/2020/202012/20201207/Archer_MR600v1_1.1.0_0.9.1_[201204-rel66940]_up_boot_2020-12-04_19.05.35.zip

Note: Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.

 

Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1:

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip

 

TL-MR6400(APAC)_V3: 

https://static.tp-link.com/2020/202004/20200403/LTE_GATEWAYv3_1.2.0_0.9.1_up_boot(200402)_2020-04-02_17.28.07.zip

 

TL-MR6400(EU)_V5:

https://static.tp-link.com/2020/202012/20201208/TL-MR6400(EU)v5_1.1.0_0.9.1_[201113-rel63736]_up_boot_all_2020-12-08_09.38.45.zip

 

Archer MR200(EU)_V5:

https://static.tp-link.com/2020/202010/20201012/Archer_MR200(EU)v5_1.0.0_0.9.1_[200925-rel32374]_up_boot_all_2020-09-30_11.15.13.zip

 

TL-MR150(EU)_V2:

https://static.tp-link.com/2020/202011/20201117/TL-MR150(EU)v2_1.1.0_0.9.1_[200930-rel56894]_up_boot_all_2020-09-30_15.53.06.zip

 

 

*The official firmware has been released for the below models, you can install the latest firmware via the online upgrade or download it from the official website:

TL-MR100(EU)_V1_201016

Archer MR600(EU)_V2

TL-MR6500v(EU)_V1

 

You will get the band selection option on the Basic->Internet or Advanced->Network->Internet page, based on the model of your devices: