Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
| Archer MR600(EU) v2 | supported via the latest official firmware |
| Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 (Beta firmware) |
| Archer MR400(EU) V4.2 | supported via official firmware |
| Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 (Beta firmware) |
| Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 (Beta firmware) |
| Archer MR200(EU) V5.2 | supported via official firmware |
| Archer MR200(EU) V5 | ArcherMR200(EU)_V5_211015 (Beta firmware) |
| Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6500V(EU)V1 | supported via latest official firmware |
| TL-MR6400(EU) V5.2 | supported via latest official firmware |
| TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 (Beta firmware) |
| TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 (Beta firmware) |
| TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 (Beta firmware) |
| TL-MR150(EU)V1 | LTE_GATEWAY_20210108 (Beta firmware) |
| TL-MR100(EU)V1 | supported via the latest official firmware |
| M7450(EU) V2 | M7450(EU) _V2_20220303 (Beta firmware) |
| M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 (Beta firmware) |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, I have installed beta firmware (TL-MR150 (EU) v2_1.1.0_0.9.1_ [200930-rel56894] _up_boot_all_2020-09-30_15.53.06.zip) on TL-MR150 (EU) V2. When the range is 7, the router cannot connect to the network. On the old default firmware, I see that the router works on the 7 band without any problems. What's wrong?
- Copy Link
- Report Inappropriate Content
Hi, thanks for asking. To be honest, we TP-Link as the manufacture don't provide refund for the devices sold in the market, you will need to check if you can do this with the local reseller where you purchased it.
- Copy Link
- Report Inappropriate Content
When you choose band 7 on the MR150, is it showing connecting or disconnect on the Status page? Can you please show us the screenshot?
What if you just leave it auto or choose some other bands, will it connect?
Who is your SIM card carrier?
- Copy Link
- Report Inappropriate Content
On the band 7 the router does not connect. No connection. Everything works on the auto band range. The picture has not been saved, so for now I have to roll back to the old firmware. Mobile operator Beeline.
- Copy Link
- Report Inappropriate Content
I see, please check if you can connect via band 7 by rolling back to the previous firmware, please let me know the specific version, thanks.
- Copy Link
- Report Inappropriate Content
@Kevin_Z- Copy Link
- Report Inappropriate Content
Thank you for the screenshots. So band 7 is an option, while it will not connect to the internet once switch it manually.
Just to confirm, have you tried to roll back to the previous official firmware on the MR150, is it able to connect at band 7 now?
To locate this issue and try to fix it, we would like to follow up on your case via email. Please check your inbox and provide the information that we need.
- Copy Link
- Report Inappropriate Content
@Kevin_Z I have Archer MR600(EU)_V1_190412 and would like to try the Band Selection Beta 201204-rel66940. But I also have the SMS messages not showing issue in thread https://community.tp-link.com/en/home/forum/topic/170892 where the solution is another Beta 200331-rel65841 My question is ... does the Band Selection Beta firmware rel66940 include the fix for the SMS messages? If not, are these likely to be rolled-up in an official release anytime soon?
- Copy Link
- Report Inappropriate Content
Hi, thanks for asking.
The beta firmware for band selection does include the sms display fix, so you can install it on the MR600 to confirm:
- Copy Link
- Report Inappropriate Content
Could you please check with dev team and let us know when we can expect official firmware for MR600 V1 with band selection ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 149326
Replies: 309
Voters 5
