Archer MR600 V2 Carrier Aggregation & Band Selection
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I'm facing the same problem
Any solution
Whenever i try to lock both the bands but it selects only one band
- Copy Link
- Report Inappropriate Content
@ajay298 No solution at all. I tried everything. Even i installed 2 LPDA antennas. No luck.
The TPLink technical team need to fix this issue.
- Copy Link
- Report Inappropriate Content
After a year that everything went well now I have the same problem, if someone found a solution, could they post it in this thread?
- Copy Link
- Report Inappropriate Content
Hi, Carrier Aggregation is supported and enabled by default. For the supported bands and band combinations, please check the specification of the product on our official website. However, whether and how the bands will be aggregated is related to the base station as well, we are unable to force it to work on 4G+ or force it to work on a specific band combination. Therefore, when you select two or more bands, the MR600 might work on only one band as well. If your SIM card supports different band combinations in 4G+ mode, you could also try other supported band combinations.
In addition, for comparison, could you please insert the same SIM card into another 4G+ LTE Cat6 product at the same time to see which band(s) it uses?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 25398
Replies: 35