Home Network Community > DSL Modem&Routers > Changing DNS server
< DSL Modem&Routers

Changing DNS server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Changing DNS server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Changing DNS server
Changing DNS server
2021-08-03 05:43:10 - last edited 2021-08-04 12:24:08
Model: Archer VR2800  
Hardware Version: V1
Firmware Version: 0.7.0 0.9.1 v006c.0 Build 210313 Rel.74106n

Hi all,

 

Tried to edit Title to read: Changing DNS server

 

I have an Archer VR2800 running in DSL Modem Router Mode. All is great, however I having problems changing my DNS server from 1.1.1.1 to my Raspberry Pi Adguard on 192.168.1.13

 

The pi is working correctly, I can set my PC's connection to use it as the DNS server but if I change the DNS server to 192.168.1.13 on the modem, the modem reboots and changes the LAN settings and the local modem IP address, from 192.168.1.1 to 192.168.0.1 and therefore all my locally attached devices are messed up.

 

Why can't I just change the DNS server and all the other settings remain the same? I didn't have this problem with any other modem I'v used.

 

Thanks.

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Changing DNS server-Solution
2021-08-03 08:47:43 - last edited 2021-08-04 12:24:08

@liquidguru 

 

Go through this thread to find your answer.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
7 Reply
Re:Changing DNS server-Solution
2021-08-03 08:47:43 - last edited 2021-08-04 12:24:08

@liquidguru 

 

Go through this thread to find your answer.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:Changing DNS server
2021-08-03 09:38:26

@terziyski 

 

Many thanks for your reply.

 

I'm still a little confused...I would need to change the DNS IP in the first or the second place I've marked in red?

 

Ima

  2  
  2  
#3
Options
Re:Changing DNS server
2021-08-03 10:05:57

@liquidguru 

Hi，the previous issue might be caused by the IP conflict.
And I guess the first time you changed the DNS under network>internet?
If you want All LAN clients to use the Pi address as the DNS server, the red spot on the above picture would be the right place to change the DNS server to be Pi-hole.

Deco Monthly Recap- Check What's Currently Going on With Deco
  1  
  1  
#4
Options
Re:Changing DNS server
2021-08-03 10:15:04

@TP-Link 

 

Thank you for your reply. Do you mean change it in both red spots in the picture?

  0  
  0  
#5
Options
Re:Changing DNS server
2021-08-03 10:51:31

@liquidguru 

 

You're targeting Primary DNS field.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  3  
  3  
#6
Options
Re:Changing DNS server
2021-08-03 11:03:49

@liquidguru No, just the primary DNS field.

Deco Monthly Recap- Check What's Currently Going on With Deco
  1  
  1  
#7
Options
Re:Changing DNS server
2021-08-03 11:46:18

@terziyski and @TP-Link 

 

Many thanks, all working now. I aprreciate your fast answers and help.

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 972

Replies: 7

Related Articles
Changing DNS addressing
321 0
Dns server
361 0
Changing DNS when your DNS is not working
772 0
Wireguard Server and Local DNS server
229 0
Forcing a specific DNS Server
726 0
Change DNS manually
422 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.