Deco M5 1.7.8

Deco M5 1.7.8

862 Reply
Re:Deco M5 1.6.0
2022-06-13 16:09:12

  @RoyKolk ah cool. Thnx. Hoe heb jij de juiste versie van je router bepaald? (V3 of V3.2 en etc? ) en hoe heb je hem geïnstalleerd, via de webinterface?
 

ik ben benieuwd hoe het draait voor jou de komende week ofzo. Ik ben nog een beetje schuw vanwege het slechte beta test traject en de vele bugs 😀 maar jouw opmerking geeft al meer vertrouwen. 
 

  0  
  0  
#409
Options
Re:Deco M5 1.6.0
2022-06-13 16:32:07

  @David-TP when will The firmware update for Deco M5 will be available through the deco app? 
 

thank you. 

  1  
  1  
#410
Options
Re:Deco M5 1.6.0
2022-06-14 01:39:48

  @JanRekenaar 

Hi Jaap
Thank you very much for your email.
Since 1.6.0 just came out, it still needs some time for the local web support to upload the firmware.
As for the Deco APP, the firmware upgrade is applied in sequence to the correct devices during the release process, and at the very beginning of new firmware with huge modifications, a small portion will detect the firmware first, then the number of users will be gradually increasing.

Thank you very much.
Best regards.

 

--------------------------

Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.

Deco X50-POE Survey

 

.

  1  
  1  
#411
Options
Re:Deco M5 1.6.0
2022-06-14 08:07:03

Nice, TP-Link France has released it on their web page.

 

I'm going to wait for the availability on the Deco app, I think ;) but they have been more faster than I suposed!

  3  
  3  
#412
Options
Re:Deco M5 1.6.0
2022-06-14 08:21:05

  @JanRekenaar 

 

Ik heb op de achterkant van mijn deco gekeken. daar staat aan de rechterkant welke versie je heb. ik mijn geval was dit V3.

ik heb de firmware los gedownload en via de webinterface idd geinstalleerd.

 

ik moet zeggen, waar voorheen na een aantal uur de snelheid van 450-500mb terug viel naar 80mb is hij vandaag nog steeds rond de 450.

dus tot nu toe nog steeds blij met de update, en zou je hem zeker aanraden. ook is me netwerk een stuk stabieler. 

ik draai al een tijd op de beta want hiervoor had ik ook steeds wifi problemen. maar dat lijkt nu volledig opgelost.

  4  
  4  
#413
Options
Re:Deco M5 1.6.0
2022-06-14 15:28:43

Mjather wrote

  @David-TP when is this planned for the M9 Plus? Crazy to think a more expensive device won't get the update that will allow it to properly use the extra hardware! I have 3 units and my third takes signal from the main rather than the secondary unit which has better signal as it's closer to the main unit. Extremely frustrating. 

  @David-TP any reponse to the above question please? 

  1  
  1  
#414
Options
Re:Deco M5 1.6.0
2022-06-14 18:43:45

  Hey everyone, it is possible to disable wifi broadcast on a main deco5, which is configured as a router? Thanks! 

  0  
  0  
#415
Options
Re:Deco M5 1.6.0
2022-06-14 19:20:40 - last edited 2022-06-14 19:23:20

  @Kokw 

Kokw wrote

  Hey everyone, it is possible to disable wifi broadcast on a main deco5, which is configured as a router? Thanks! 

 

Hi , you may disable wifi broadcast on the main SSID .

If you disable any band 2.4Ghz or 5Ghz all the Decos will stop broadcasting and you will loose wireless local  access.

 

  0  
  0  
#416
Options
Re:Deco M5 1.6.0
2022-06-15 11:39:14
I have a m5 v1 and a v3 setup in router mode. What version do I select when I want to upgrade to 1.6.0?
  0  
  0  
#417
Options
Re:Deco M5 1.6.0
2022-06-15 11:47:48

  @budgie29 Good question. I have V2 and V3 mixed devices in one Deco network. So i have the same question @TP_LINK 

  0  
  0  
#418
Options