Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP any updates on when the firmware will be available through Deco iPhone app? Zone = Amsterdam, Paris
- Copy Link
- Report Inappropriate Content
@TP-Link Where can I find the download link for beta 1.6.0? The link on this post only gives me access to 1.5.7. I have a V1 M5
- Copy Link
- Report Inappropriate Content
Hi, you could get the official firmware here:
budgie29,JanRekenaar Thanks for the notification.
Till now, the cloud release is still kept under a lower percentage, and many users might not be able to detect the new firmware via Deco APP.
If you can see the 1.6.0 firmware on the local website, you could consider manually updating the firmware via the web interface.
If there is nothing on the local website yet, you can leave me a message and we will check with the local web support regularly.
Thank you very much for your understanding and support.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi @David-TP,
Do you know when this firmware will be available for the Deco M5 in Mexico/USA/Canada?
The latest I see in the support site is 1.5.7.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP thank you very much for your answer. If I upgrade the firmware throughout the webinterface, do I have to manually install the firmware on all units apart, or is one install on Main Deco enough?
thank you
- Copy Link
- Report Inappropriate Content
Thank you all for the messages. I might not reply but I have already noted it down.
I think you might need to manually upload all but I haven't tested it yet.
It would be highly appreciated if you could share your result with us.
Thank you very much.
- Copy Link
- Report Inappropriate Content
@David-TP I presume that the principle of installing firmware throughout the webinterface has not changed the last couple of years? 1.5.7 en 1.5.4 could also be installed throughout the web, how did that work out, was 1 install in Main Deco enough?
I ask this because I cannot be a tester in production (what you ask basically) because my whole household depends on good working internet right now.
- Copy Link
- Report Inappropriate Content
@David-TP any reason why my Deco m5 v1 doesn't show up with the firmware being available for it?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 239533
Replies: 873