Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@JanRekenaar i don't know the result yet, i just change the setting not long ago.
Have to monitor it for couple of days
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link
Can You help with other Decos firmware with disabling DHCP in AP mode ?
I've got 2x M4R and 2x P9 , and huge problem with "smart DHCP" , which override my DHCP server on main router (working with no problems for 2 weeks).
thanks
- Copy Link
- Report Inappropriate Content
Thank you for your detailed message.
The model of the camera is: Egardia CAM-08AI.
I didn't try to disable "Mesh Technology".
Tested for a while on the WiFi of my router (not including the decos).
They will stay online there. However, that does not provide enough coverage.
I have therefore installed network cables and that solved the problem.
For the rest, the decos work fine with the new update, only the cameras had problems with the new firmware of the decos (the old firmware was fine).
Greetings Kees.
- Copy Link
- Report Inappropriate Content
Just another question, will it be possible in the future to give the deco m5 systems a fixed ip address in ap mode?
- Copy Link
- Report Inappropriate Content
JanRekenaar Hi, the release note" Improved system reliability and security", does not refer to a specific security fix and just some software components have been upgraded to enhance the system security.
knorde Thanks for the update.
When Deco is on AP mode, you could try to set an address reservation on the front main router to get a fixed IP address for Deco.
- Copy Link
- Report Inappropriate Content
On The main router DHCP server (pfSense) I've set fixed IP leases for each Deco MAC Address.
Works perfectly, each Deco with an IP Easy to remember.
Best Regards.
- Copy Link
- Report Inappropriate Content
@Billy_Tan So, how are your deco's holding up? After a couple of days?
- Copy Link
- Report Inappropriate Content
@David-TP Hi David, do you have any updates on the bugs concerning the camera’s that lose connection and the smart switches that lose connection? Are these things being investigated by engineers, and if so, will there be an update 1.6.1 soon? Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 236374
Replies: 873