Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
So far so good. No disconnect from any of the cameras.
- Copy Link
- Report Inappropriate Content
@budgie29 Thank you for your reply. Do you have both 2,4 ghz as 5 ghz devices in your network? In other words: do the 2,4 ghz devices still work? As that seems to be problematic for some users
- Copy Link
- Report Inappropriate Content
Jan, also do not regornize this problem.
I have a netatmo doorbell, nefit easy and some Tuya network lamps, running on 2,4 ghz and 5ghz. But the only thing I have is Ethernet backhaul 3x m5 and one deco m5 wireless connected.
it seems that people running al deco's wireless they have a problem with the 2,4ghz and 5 ghz steering
- Copy Link
- Report Inappropriate Content
@Sonic007 thank you. You might be right though. Ik have 4 decos M5 all wired backhaul. I upgraded today (bit the bullet 🙃) to 1.6.0. And ... so far so good! Everything is still working. So now have to wait a couple of days and see how it will hold.
- Copy Link
- Report Inappropriate Content
@manni I agree with you. I also bought them in 2018 and they have never had any disruptions. Deco M5 pretty solid device.
- Copy Link
- Report Inappropriate Content
No-IP support isn't working. At least not with custom domains. I've tried with my account data (both, email and username) using my custom domains and always get an connection fail. Anyone else?
- Copy Link
- Report Inappropriate Content
Hi, Do you use No-IP DDNS to access a local server connected to Deco M5?
Please check the following details first:
1. Is the NO-IP hostname showing the current public IP address?
2 . Is the DNS server returning/resolving the right IP address?
There is a troubleshooting guide that might be helpful:
(It is not allowed to be posted here and please have a look at the private message.)
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
David-TP wrote
knorde Thanks for the update.
When Deco is on AP mode, you could try to set an address reservation on the front main router to get a fixed IP address for Deco.
Cicero_Neto wrote
On The main router DHCP server (pfSense) I've set fixed IP leases for each Deco MAC Address.
Works perfectly, each Deco with an IP Easy to remember.
Best Regards.
Thanks!
- Copy Link
- Report Inappropriate Content
After a couple of days of using 1.6.0 still no issues. Seems solid. My configuration :
- cable modem ->
- main deco ->
- unmanaged switch->
- 3 decos ->
- all wired backhaul
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 233378
Replies: 870