Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Alexandre. Eu tenho o arquivo salvo aqui. Caso tenha interesse, me envia um e-mail que lhe encaminho. igorfujishima@gmail.com
- Copy Link
- Report Inappropriate Content
@David-TP since I updated my 4 deco M5 to 1.7.0 I experience a lot of devices disconnecting then reconnecting.
I tried to restore settings for these devices (because I disabled mesh and specified where they have to connect which fixed these kind of issue on firmware 1.6) but issue percist.
So yes, I can confirm there are a lot of issues with this firmware, I hop a new firmware will be available soon.
- Copy Link
- Report Inappropriate Content
Hello @David-TP ,
Since I updated my Deco to this latest version (1.7.0) my VPN connection doesn't work anymore. Could you pls inform how to rollback to the previous one OR when do you expect to release the next version with the needed fix?
- Copy Link
- Report Inappropriate Content
Yeah I was surprised because the firmware has been removed from the website. All my M5's have been upgraded to 1.7.0. I even have reconfigured all my IoT devices to new "IoT Network" with different SSID. On Deco app I can see the devices are seem connect and disconnected, but based on my local smokeping apparently they are connected just fine.
But most notable bug is that now I am unable to use Deco app remotely/via internet.
I really hope whoever/whatever team in charge for QA really, really, do their job before releasing the firmware.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
Could you please refer to this link to help me submit the APP log:
@MarceloMR Hi, welcome to the community.
Can I have more details about your current issue?
What kind of VPN service do you use, like OpenVPN, L2TP/IPsec?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I'm using OpenVPN (via Windows 10 profile). When I toggle from Wi-Fi to mobile 4G coverage, the VPN runs smoothly.
David-TP wrote
Hi, Thank you very much for the feedback.
Could you please refer to this link to help me submit the APP log:
@MarceloMR Hi, welcome to the community.
Can I have more details about your current issue?
What kind of VPN service do you use, like OpenVPN, L2TP/IPsec?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP I wanted to confirm and thank you for this info as this was the trick and it now working. Thanks!
EDIT: this didn't seem to include the info I was replying to :
Hi, I have seen a similar setup:
Modem > M5 (Main) >--cable--CPE210(AP mode))))---WiFi bridge---(((CPE210 (client mode)>---cable--- M5 (Satellite)
Then satellite M5 is ok to create an Ethernet Backhaul.
So I think you might need a pair of CPE210s to build a wireless bridge in order to create the Ethernet Backhaul.
- Copy Link
- Report Inappropriate Content
@TP-Link Hi, still no news about release date for next update?
- Copy Link
- Report Inappropriate Content
I upgraded my two M5's to 1.7.1 last week. Update went fine and everything is fine. They are with ethernet backhaul. New features are also good stuff, Eco Mode and isolating IoT devices from other local network.
My 5 year ole devices still rock! Thank you TP-Link.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 237442
Replies: 873
Voters 5
