Remote control on Archer VR1210V

Remote control on Archer VR1210V
Remote control on Archer VR1210V
2022-03-31 16:30:54
Hardware Version:
Firmware Version:

Hi,

On my Archer VR1210V is possibile the remote control?

If yes where i can found the related setting ?

Thanks !

Luciano 

0
0
#1
Options
6 Reply
Re:Remote control on Archer VR1210V
2022-03-31 21:55:35

  @Evvivame1 

 

Hi,

 

Check if this configuration guide is of any help to you https://www.tp-link.com/en/support/faq/1758/ .

 

1
1
#2
Options
Re:Remote control on Archer VR1210V
2022-04-05 20:12:24

  @woozle 

Hi,

 

Check if this configuration guide is of any help to you https://www.tp-link.com/en/support/faq/1758/ .

 

Thanks for your answer !

 

Unfortunately i don't see the section "remote menagement " ( as shown on point 2 of your link) : see my screen attached

up part

down part

2
2
#3
Options
Re:Remote control on Archer VR1210V
2022-04-07 12:17:11

  @Evvivame1 

Hi, is the modem provided by your DSL service provider directly?

And may I know your current firmware version of Archer VR1210v?

Sometimes for the ISP customized mode, the web UI might be a little different and the remote management might be disabled by the internet provider.

 

0
0
#4
Options
Re:Remote control on Archer VR1210V
2022-04-07 16:42:21

  @David-TP 

 

Thanks for your support !

 

1) is the modem provided by your DSL service provider directly? Yes it's provided directly from service provider EOLO (Italy)

2) And may I know your current firmware version of Archer VR1210v?  The firmware is up to date  ( Archer VR1210v v1_2.0.0 0.9 v6041.0 Build 220304 Rel.6349n )

 

I suspect my issue due point 1)   angry

p.s. for example with this UI isn't possible firmware update angry

 

Best regards

 

Luciano

 

0
0
#5
Options
Re:Remote control on Archer VR1210V
2022-04-28 06:00:11

I just bought my AX21 and set it up today. Due to security concerns (it's inevitable that TP-Link cloud or whatever manages remote access will eventually get compromised), I would like for my router to not be remotely manageable.

Is it correct that the only way of disabling this is to logout/unbind my TP-Link ID? I could do this but this presents a dilemma, because I do want to use Dynamic DNS (which requires logging in), but not enabling remote management. Is there any way to accomplish this?

0
0
#6
Options
Re:Remote control on Archer VR1210V
2022-05-21 15:42:06

  @HereturbiesWalt 

 

Hi,

 

You should be able to select "NO-IP" and "DynDNS" in the list of DDNS Service Providers.

 

Just use any of these two if you don't want to use TP-Link ID. 

0
0
#7
Options