TL-PA7017P KIT conflict with TL-WPA4220

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-PA7017P KIT conflict with TL-WPA4220

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-PA7017P KIT conflict with TL-WPA4220
TL-PA7017P KIT conflict with TL-WPA4220
2022-04-01 15:47:58
Model: TL-PA7017 KIT  
Hardware Version: V4
Firmware Version:

Hello! I have a wired network with the PA7017P kit (AV1000) which was working great! I bought 1 WPA4220 (AV600) which I wanted to pair with the PA7017 connected to my router. I used pair button and it connected very fast with very good bandwidth. I connected it with ethernet to a PC. But when I turned on the PC connected to the second PA7017, internet was dead. I had a bandwidth of 0.3MBPS! At first I thought that something was wrong with my internet connection but when I powered off the WPA4220 and restarted the PC connected to PA7017 everything was back to normal. I powered on WPA4220 again and same thing happened...

What is wrong?

 

Thank you in advance!

  0      
  0      
#1
Options
1 Reply
Re:TL-PA7017P KIT conflict with TL-WPA4220
2022-04-11 08:31:17

 Hello  @Theotokis 

Thank you for the feedback, for best performance it is recommended to use the power line device of the same speed. 

How can I select the powerline device?

If its a new AV600, I'd recommend consider exchanging AV600 to AV1000 to work with the old AV1000 kit. 

You could try a different wall socket for WPA4220, and refer to instruction here to check if any device could cause interference in the powerline circuit.  What can I do if my powerline rate is very low?

Hope this helps!

 

 

  0  
  0  
#2
Options