DHCP address reservation does not work correctly.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP address reservation does not work correctly.
After a reservation was successfully made for a device with for example ip address 192.168.1.5, then when you return on a later moment to the address reservation menu, the reservation has been changed to ip address 192.168.0.5
I would really appreciate to hear how this can be solved
Regards Youp
Update:
Problem Description
After the address reservation/port forwarding was successfully made for a device with for example IP address 192.168.1.5, then when you return to the configuration menu at a later moment, the reserved/forwarded IP has been changed to 192.168.0.5. Or when you disconnect the client, renew the IP address, and connect back, the clients get another IP address rather than the one reserved on the Deco APP.
Available Solutions
1. Please make sure the firmware is up to date.
1) For Deco M4R/ S4/ E4R/ M5/ M9/ X55; Deco X68/X3600/W7200;Deco XE75/XE5300/X90, the latestfirmware has fixed this issue already.
2)For other models, please refer to the following firmware:
| Deco X60-V1 | Deco X60-V1-build20210618 |
| Deco X60-V2 | Deco X60-V2-build20210618 |
| Deco X20-V2 | Deco X20-V2-build20220112 |
2. If your models are not included, please comment below first, then try the following suggestions:
1) Please change the LAN IP range to something out of 192.168.0.1 to 192.168.3.254, such as 192.168.68.1.
2) If your LAN IP has to be in 192.168.0.x-192.168.3.x, please change the Subnet Mask to 255.255.255.0.
Note:
1. Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
2. Be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding!
-------------------------------------------------
Have other off-topic issues to report?
Welcome to > Start a New Thread < and elaborate on the issue for assistance.
Update:
Problem Description
After the address reservation/port forwarding was successfully made for a device with for example IP address 192.168.1.5, then when you return to the configuration menu at a later moment, the reserved/forwarded IP has been changed to 192.168.0.5. Or when you disconnect the client, renew the IP address, and connect back, the clients get another IP address rather than the one reserved on the Deco APP.
Available Solutions
1. Please make sure the firmware is up to date.
1) For Deco M4R/ S4/ E4R/ M5/ M9/ X55; Deco X68/X3600/W7200;Deco XE75/XE5300/X90, the latestfirmware has fixed this issue already.
2)For other models, please refer to the following firmware:
| Deco X60-V1 | Deco X60-V1-build20210618 |
| Deco X60-V2 | Deco X60-V2-build20210618 |
| Deco X20-V2 | Deco X20-V2-build20220112 |
2. If your models are not included, please comment below first, then try the following suggestions:
1) Please change the LAN IP range to something out of 192.168.0.1 to 192.168.3.254, such as 192.168.68.1.
2) If your LAN IP has to be in 192.168.0.x-192.168.3.x, please change the Subnet Mask to 255.255.255.0.
Note:
1. Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
2. Be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding!
-------------------------------------------------
Have other off-topic issues to report?
Welcome to > Start a New Thread < and elaborate on the issue for assistance.
Although this thread is old, I would like to report that version 1.1.4 Build 20230714 Rel 2881 got the problem back on my X20.
I attached a screenshot where one reservation is ok (the one I created before updating to latest version this weekend) and 3 reservations that are wrong and that I created ffter the update. Since I bought my X20 new last week, I have no record of what version I had at the time of purchase.
Regards, Eric.
