Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
| Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
| Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
| Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer MR600(EU) V3 | Archer_MR600(EU)_V3_250429_Beta |
| Archer MR600(EU) V2 | |
| Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
| Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
| Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
| Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
| Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
| Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
| Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
| TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
| TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_230801_Beta |
| TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
| TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
| TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Jio sim Stops Working after upgrading to jIo 5G
sim.(No service)
TL-MR100 v1 00000001(1.6.0 0.9.1 v0001.0 Build 221011 Rel.71875n)
The other jio sim which did not get the 5g update working just fine...
In logs it says: USER: Registration denied by the visible network!
I think the problem is jio is not allowing tplink router to use 5g sims ...
So Tp Link Should Solve the issue with jio.
It almost a month I am in much trouble . please resolve as soon as possible.
- Copy Link
- Report Inappropriate Content
@Abhijit_Ghosh10 tplink is not responding on it now man i think they don't care about their users
- Copy Link
- Report Inappropriate Content
I have the same issue. I am using MR600 V2. Even after the update same issue.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Vikram_Singh did you get the Beta version of the firmware from them???
Because today I got a reply from them saying they have identified the issue or they have some inside now and they will update in the thread shortly.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Vikram_Singh Did you got beta firmware?
- Copy Link
- Report Inappropriate Content
Vikram_Singh wrote
They have fixed the issue and currently in beta testing, please email them for beta version
Hi All,
We have updated the solution, beta firmware for MR600 V2 and V3 are available now, please check the solution updated in my original post and let us know if it solves the problem.
- Copy Link
- Report Inappropriate Content
@Sunshine Thanks a lot for the support in releasing the Beta software.
Hope the Beta Software will be released soon for MR600 V1
- Copy Link
- Report Inappropriate Content
Hi,
I updated to Archer_MR600(EU)_V2_230506_beta fw.
Now jio sim is working.
But in many pages of router settings, it's showing as airtel.
Pls check the ss.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 49
Views: 124866
Replies: 463
Voters 7
