Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
| Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
| Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
| Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer MR600(EU) V3 | Archer_MR600(EU)_V3_250429_Beta |
| Archer MR600(EU) V2 | |
| Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
| Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
| Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
| Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
| Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
| Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
| Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
| TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
| TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_230801_Beta |
| TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
| TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
| TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Please share the stable firmware build for TP Link MR600 V3 device for India to revert back to stable.
I don't see the firmware details of V3 available in the official site.
- Copy Link
- Report Inappropriate Content
Hi, you mentioned that now Jio 5g sim is working even on previous firmware Archer MR600(EU)_V2_220826, could you please check if there are both Internet IPv4 address and IPv6 address on Advanced->Status->Internet part?
And you've already updated the V2 beta firmware and then downgrade to the previous firmware Archer MR600(EU)_V2_220826, right?
- Copy Link
- Report Inappropriate Content
@Sunshine yes there are ipv4 and ipv6 address
- Copy Link
- Report Inappropriate Content
Airtel sim is not working on tp link mr600 v2 on stable firmware after downgrading to Archer MR600(EU)_V2_220826, no ipv4 qnd ipv6. but it's working on beta firmware only ipv6 websites. it was working fine before upgrading to beta.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine I am having V1. Can you please update when new firmware of V1 will be released so that I can use my router on Jio network
- Copy Link
- Report Inappropriate Content
@Sunshine Pls help me . I have V1
Jio Sim stopped working on it.
- Copy Link
- Report Inappropriate Content
Airtel 4G SIM on the original/previous firmware didn't work.
It does work on new firmware but very hard to load a website.
- Copy Link
- Report Inappropriate Content
@Sunshine when firmware is coming for others models?
please responce
Sunshine wrote
@Subrata_9932 @Vignesh_Y @amitkray31 @Abhijit_Ghosh10
Hi, we are working on more beta firmware for different models/versions, once there is any new beta firmware, I will update the solution again.
- Copy Link
- Report Inappropriate Content
Please Provide Firmware for TP link MR200 V4 also.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 49
Views: 124956
Replies: 463
Voters 7
