Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
| Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
| Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
| Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer MR600(EU) V3 | Archer_MR600(EU)_V3_250429_Beta |
| Archer MR600(EU) V2 | |
| Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
| Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
| Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
| Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
| Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
| Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
| Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
| TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
| TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_230801_Beta |
| TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
| TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
| TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunshine HI,
Internet is not working even after updating firmaware in MR6400. Network also only one Bar where as i get full network in my mobile.
Router Model is TL-MR6400 (EU) ver 5.30
Can you please help how i can rectify this
- Copy Link
- Report Inappropriate Content
Test This Version
https://static.tp-link.com/upload/beta/2023/202308/20230803/TL-MR6400(EU)_V5.30_1.6.0_230801.zip
- Copy Link
- Report Inappropriate Content
@TitoX Hi. Thanks for the response.
Tried updating the firmware shared by you but the problem is not resolved.
- Copy Link
- Report Inappropriate Content
Hi, When using Jio 5G SIM on MR6400 V5.30 and MR600 V2 with the latest beta firmware, please check the default profile settings on the Advanced->Network->Internet page, if the PDP Type is not on the "XLAT", please create a new profile manually and set PDP Type to "XLAT", then check if everything will work fine.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the update, glad to hear that the issue has been resolved.
Could you please help to confirm the MCC and MNC of your Jio 5G SIM card? In this way, we could update the default profile for the specific MCC&MNC so that it can be plug and play without adding profile manually.
You could insert the Jio 5G SIM card into your smartphone, then check the APN profile settings on the phone to find the MCC and MNC, please share with us the screenshot, thanks a lot!
Navvi12 wrote
@Sunshine Thanks for suggetion. Looks like it is working fine after adding profile with XLAT.
- Copy Link
- Report Inappropriate Content
@Sunshine When can we expect the firmware upgrade for MR200 v5?? If you require some details I can help. But please escalate it faster.
- Copy Link
- Report Inappropriate Content
@Sunshine Hi, Tried but not working. Mobile is giving better signal coverage than this
- Copy Link
- Report Inappropriate Content
Hi, do you mean internet still doesn't work after manually creating XLAT profile?
Please share with us screenshots of Advanced->Status page, Advanced->Network->Internet page along with the system log file.
By the way, for the signal coverage issue, do you mean the LTE signal strength on MR6400 is too weak? If so, please check the LTE band on both MR6400 and your mobile phone to see if they are using the same band or not.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 49
Views: 124805
Replies: 463
Voters 7
