Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
| Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
| Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
| Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer MR600(EU) V3 | |
| Archer MR600(EU) V2 | |
| Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
| Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
| Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
| Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
| Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
| Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
| Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
| TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
| TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_1.9.0 Build 260108_Official |
| TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
| TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
| TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Yes. The official firmware for the Archer MR600 V3 is also available.
Archer_MR600(EU)_V3_1.3.0_250915_Official
Best Regards
- Copy Link
- Report Inappropriate Content
JIO again stopped working on the router Archer NX200; firmware1.2.0 3.0.0 v60e0.0 Build 250 725 Rel 734667n.
it has XLAT enable .
5G not connecting . on 4G internet is not working
- Copy Link
- Report Inappropriate Content
Hi,
Typically, you can refer to the instructions below to troubleshoot if your router has no internet connection.
No internet connection when the TP-Link 5G/4G Router is working with a SIM card
If the same phenomenon persists, please provide the following information.
1. Do you have internet when the same SIM card is inserted into your phone or other routers?
2. Please send us the screenshots of the router's web UI > Advanced > Status page and Network > Mobile WAN page.
Best Regards
- Copy Link
- Report Inappropriate Content
@JJJ123 I have NX200 ;
Firmware Version:1.2.0 3.0.0 v60e0.0 Build 250725 Rel.73467n
Hardware Version:Archer NX200 v2.0 00000000
since 2-3 months it is working only on JIO 4G. But when i select JIO 5G , it stops connecting to Internet.
JIO 4G gives only 2G per day and 5G is unlimited.
Does someone has the solution for this ?
Regards,
Sourabh
- Copy Link
- Report Inappropriate Content
On JIO 5G its always disconnected. Works only on JIO 4G:
Firmware Version:1.2.0 3.0.0 v60e0.0 Build 250725 Rel.73467n \
Hardware Version:Archer NX200 v2.0 00000000
- Copy Link
- Report Inappropriate Content
Try selecting xlat option on from auto and check it. Should be fine. Jio uses xlat and work on SA on 5g
- Copy Link
- Report Inappropriate Content
Hello,
XLAT i have turned on. The issue is: 5G is not latching on . But 4G working fine.
Also, when i remove the SIM and put it back in phone, the 5G doesnt come for about 24 hrs in the SIM. I think JIO might have blocked the routers for 5G.
Regards,
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
It's recommended to start a new thread here to post your detailed usage scenario and questions for assistance. Please also provide the following information regarding your case.
1. What 5G network types does your SIM card support?
2. Please send us a screenshot of the router's web UI > Advanced > Status page after you select JIO 5G.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 53
Views: 185989
Replies: 528
Voters 8
