Deco X50 slow speed after firmware update from 1gb to now stuck at 80-100mb

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco X50 slow speed after firmware update from 1gb to now stuck at 80-100mb

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco X50 slow speed after firmware update from 1gb to now stuck at 80-100mb
Deco X50 slow speed after firmware update from 1gb to now stuck at 80-100mb
2023-05-29 12:16:23
Model: Deco X50  
Hardware Version: V1
Firmware Version: 1.2.5 Build 20230511 rel. 67294

I have 2 units of a deco x50 conected to my router tplink c5400 via wired conection and before I was getting full 1gb on wired backhaul and then I went on a trip. I got back home the app asked me to update my units to the latest firmware and now I have tried everything and my units are stuck at 80-100 mb maximum speed. Nothing that I do works.

Please, how can I downgrade the firmware or can tplink please fix the issue and release a new firmware.

  2      
  2      
#1
Options
2 Reply
Re:Deco X50 slow speed after firmware update from 1gb to now stuck at 80-100mb
2023-05-30 02:19:55

  @Ribeiros 

Hi, welcome to the community.

Since both Archer C5400 and Deco X50 could work as wireless routers, did you turn Wi-Fi off on C5400 and use the network of Deco X50 only?

 

I noticed you mentioned that "2 units of a Deco x50 connected to my router tp link c5400 via wired connection".Since when Deco X50 is on wireless router mode, only the main Deco could connect to the C5400 via Ethernet cable.  Did you also connect the satellite x50 to C5400 or behind the main X50?

 

As for the firmware downgrade, if the original firmware is 1.2.2, the new firmware 1.2.5 barely changed anything compared to 1.2.2. I don't think it would cause the slow speed. 

If you want to downgrade the firmware, it would be accomplished via web UI directly and the process is the same as the firmware update.

How to Update the Firmware of Deco(method 2 via web UI)

firmware link for 1.2.2:https://www.tp-link.com/en/support/download/deco-x50/v1/#Firmware

 

 

But If possible, I hope you could check whether the following suggestion could help fix the current issue:

1. replace a new cable to connect the main Deco X50 to a different LAN port on C5400.

2. log into the web UI of C5400 and force all the LAN ports to 1000m/s full duplex mode.

Thank you very much,

best regards.

Wait for your reply.

  0  
  0  
#2
Options
Re:Deco X50 slow speed after firmware update from 1gb to now stuck at 80-100mb
2023-06-02 13:52:22

  @David-TP hi there, both my x50 are in acess point mode conected to the C5400 as a router, for 5 min I get my full speed of 600mb but after that stuck in 80-100mb speed, changes cables but nothing works, this started after the latest firmware, I will try to downgrade it and test to see if the issue is with my units.

  0  
  0  
#3
Options