Home Network Community > Wi-Fi Routers > Routing between 2 routers
< Wi-Fi Routers

Routing between 2 routers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Routing between 2 routers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Routing between 2 routers
Routing between 2 routers
2023-06-13 12:35:22 - last edited 2023-06-13 15:53:17
Tags: #Access Point Mode #Routing
Model: Archer AX10  
Hardware Version: V1
Firmware Version: 1.3.4

Hello,

 

The problem

I am trying to configure a local network with 2 Archer AX10 having a private network between these 2 routers and a guest network that doesn't have access to private one. And this is my current setup.

What I tried

Attempt 1

Configure 'Archer AX10 #2' as Access Pont. The problem is that the guest network can access the private network because it doesn't have the option 'Allow guests to access your local network'.

 

Attempt 2

Configure 'Archer AX10 #2' as a Router like bellow

The problem is that Archer AX #1 cannot acces devices from Arches AX10 #2 (from #2 to #1 connection works).And if I disable the NAT, I can communicate from both routers, but Archer AX10 #2 won't have connectivity to the internet.

 

What I'm doing wrong or is there any other solution to my problem? Thank you!

  0      
 
  0      
 
#1
Options
6 Reply
Re:Routing between 2 routers
2023-06-13 17:30:43

  @Dragos1 

 

Hi,

 

Do you only need the "Archer AX10 #2" to have a wireless guest network or both AX10 routers?

 

In case only the "Archer AX10 #2" needs to have a guest network, then see if you can route a cable from the ISP device to the "Archer AX10 #2" and make the "Archer AX10 #2" your main router.

  0  
  0  
#2
Options
Re:Routing between 2 routers
2023-06-13 20:55:08

  @woozle , thank you for replying, but I want both to have guest network. 

  0  
  0  
#3
Options
Re:Routing between 2 routers
2023-06-13 21:54:19

  @Dragos1 

 

I think to achieve all your goals at once you would need more sophisticated router devices.

 

  0  
  0  
#4
Options
Re:Routing between 2 routers
2023-06-14 09:48:55

  @woozle, could you advise me what router should I use? What technology it would need? And I can replace only the main router that is connected to the provider? Thank you!

  0  
  0  
#5
Options
Re:Routing between 2 routers
2023-06-14 12:04:00 - last edited 2023-06-15 22:30:51

  @Dragos1 

 

Considering your network topology and equipment you can't have both AX10 providing an isolated guest network and all client devices in the same local subnet.

With your first attempt you can only have an isolated guest network on AX10 #1.

With your second attempt you can have an isolated guest network on both AX10, but AX10 #2 introduces an additional local subnet.

You may consider Omada solution for that purpose.

Here's a guide on how to build an Omada mesh network in your home. Here's a guide on how to build an isolated guest network with Omada controller.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#6
Options
Re:Routing between 2 routers
2023-06-14 12:43:45

  @terziyski, thank you for the suggestion. I will look into the Omada setup to see if it worth the upgrade. 

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 879

Replies: 6

Tags

Access Point Mode
Routing
Related Articles
AX10 stops routing packets between LAN nodes
674 0
2 Routers 2 Modem 1 Network?
223 0
 Static Routing IPV6
568 0
 range internet light appearing on only one of 2 separate routers (AX10 router)
434 0
Archer AX10 AX1500, 2.4GHz band slow, multiple setting changes, tested 2 net services and routers
10139 2
2 Routers vs Mesh?
1518 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.