Need the updated firmware for Archer C6 v3.20 (US)

Need the updated firmware for Archer C6 v3.20 (US)

Need the updated firmware for Archer C6 v3.20 (US)
Need the updated firmware for Archer C6 v3.20 (US)
2023-08-29 19:06:46 - last edited 2023-08-29 19:16:47
Model: Archer C6  
Hardware Version: V3
Firmware Version: 1.0.16 Build 20230828 rel.44667

My router's (C6 v3.20) main WAN port was damaged which was caused by lightning. So I want the new updated firmware to use this router as a satellite router with the new easymesh technology introduced in Archer c6 v4. Currently, I'm using C6 v4 and want to use my previous Archer C6 v3.2 router as a satellite router with the current C6 v4 router so that I can use them both through mesh technology. please help me find this new firmware update. Thanks in advance.

  11      
  11      
#1
Options
2 Reply
Re:Need the updated firmware for Archer C6 v3.20 (US)
2023-08-29 19:47:59 - last edited 2023-08-30 11:53:25

  @R_U_N 

 

That is not possible because C6 HW v3.20 doesn't support Easymesh technology currently.

You could use you C6 HW v3.20 as a range extender (through its WDS feature) or in AP mode (Case 1), using one of its working LAN ports.

Another option would be to use the C6 HW v3.20 (OneMesh capable) in router mode, but configured as AP mode - Case 2 and an EasyMesh router as a sattellite - check this post.

The latter scenario assumes that you already have a main router/modem which does a NAT.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  4  
  4  
#2
Options
Re:Need the updated firmware for Archer C6 v3.20 (US)
2023-10-31 09:37:54

  @R_U_N 

  1  
  1  
#3
Options