New 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter

New 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter

63 Reply
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-09-19 22:24:59

  @David-TP 

Note:

1. Some features are not supported if Deco is under Access Point mode or there are non-Deco X50/X55_V1_1.3.0 models in the Mesh network.
2. Please make sure Your Deco APP is up-to-date.
3. The firmware downgrade could be performed via firmware recovery. >>How to use firmware recovery

4. As a reminder, similar features are planned to be rolled out gradually on other models and the technical support team does not have further details regarding the ETA of a specific model. It's suggested to check for new firmware updates on your Deco App regularly.

 

cheeky

 

But, but, but, David... why can't your developers instantly finish everything, everywhere, all at once???

 

I feel bad for developers who, instead of feeling like their work is appreciated, just see people complaining that the updates are going to be released as they're completed. I guess they'd prefer you treat firmware like a Netflix series that drops all 10 episodes of a season at one time. Only satisfied if you hold all the completed updates for a single concurrent release, even if that means, by definition, a longer average wait for everyone.

 

My favorites though are the ones who add in a little tantrum... "My model isn't in the first rollout?! Unacceptable! I'm never buying from your company again!"

  2  
  2  
#23
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-09-20 07:12:18

  @XManag3r 

Thank you very much for the details.

I see you have updated to the 1.3.1 beta already, is everything still working properly, like the memory usage and speed compared to 1.2.8?

 

@xplodzs I also found your APP feedback and thank you a lot.

And you seemed also updated to the latest 1.3.1 build 0824 beta, Did the frozen network optimization disappear? 

Wait for your reply and best regards.

 

 

  0  
  0  
#24
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-09-20 07:43:06

  @olivier2 

Hi, the 1.3.1 beta could not be used on Deco X50 V1.2 and I am sorry it has to be V1.

If there is a similar firmware for V1.2, I will keep you updated at once.

Best regards.  

 

 

@jbdub82 , Hi, welcome to the community. I do appreciate your perspective, but I think it is necessary to prioritize selecting one or a few models to receive new feature updates initially. This allows us to thoroughly test and apply the latest advancements to these specific models. Take the previous 1.2.x firmware cycle for example, once the stability and performance of 1.2.0 on Deco X55/X50_V1 meet the expectations, similar firmware would gradually roll out on different models like Deco XE75 and other WiFi 6/6E models within 1-2 weeks.

Thank you very much.

  0  
  0  
#25
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-09-20 07:43:50

  @David-TP Not really. the optimization section says what needs to be optimized .then after the error comes out. repeated optimization takes a long time and then writes optimization is not needed

  1  
  1  
#26
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-09-20 08:14:36
Hi @David-TP well i think 1.2.8 was running smoother than this, but it's just my opinion, maybe I'm wrong. Regards.
  1  
  1  
#27
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-09-23 19:06:30
Bulls**t waiting nearly 3 years for the promissed updates! Only New Devices will get. Until there is a new rev. It‘s only making money with garbage
  2  
  2  
#28
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-09-29 19:37:12

  @David-TP 

Hi David,

 

Can you please tell:

- When (year+month) is this feature expected to be rolled out to Deco M4 (if at all)?

- Will the white-listing feature be available in access point (AP) mode (it should of course)?

 

I need this info to decide if it is worthwhile to keep the set.

If it takes too long I will have to return the set.

 

Thank you for your reply,

Braham

  0  
  0  
#29
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-10-01 18:12:42
As I know TP-Link update strategy and have the Same Problems with my x60. The best tip is run away from TP-Link as fast as you can!
  1  
  1  
#30
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-10-02 14:11:33 - last edited 2023-10-02 14:12:21

  @David-TP 

 

2 issues has been discovered :

1. DNS settings are not actually the ones that have been set from the router page.

-- They are routed to some unknown DNS locations: JAPAN, USA and I'm located in Europe and using cloudflare DNS...

2. Something went wrong again appeared (which in 1.2.8 beta has been fixed)

3. The report option is disabled, but I'm still receiving weekly reports

  1  
  1  
#31
Options
Re:Pre-Released 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
2023-10-04 09:25:09

  @David-TP 

Can the new firmware also be tried with the hardware version 1.20 of the X50?

Amazon sells more (or only) this version

Thank you

  1  
  1  
#32
Options