Deco X55 with Sky Q, Please help
Hi Guys
I'm a bit of a newb here so please go steady.
The issue i have is that we live in a house which is hard to get good WiFi at decent speeds and stability. Our ISP is Sky and we have the Sky Q Hub/Router, a Netgear unmanaged swith as the Hub only has 1 port, Sky Q main box and 1 mini box with a booster in between them, all 3 on the same floor.
I have read about these whole home mesh systems so decided to take the plunge with this TP-Link X55 as i recognised they are a good make with a good reputation. So today i tried to install them. I put the Deco's into AP mode as suggested with comments ive read. I managed to update and install all 3 and took wifi readings around the home and it was a vast improvement on consistancy from room to room, excellent i thought!!
I then turned both TV's back on, that where the issue lies. The main Sky Q box seemed to be Ok but the Mini box definitley wasn't. The picture just froze or threw up a connection error. The main Q box is NOT wired up via ethernet, but the Mini does have an ethernet cable routing its way back to the Sky Q Hub/Router.
How on earth do you get the Deco mesh X55 system to work with Sky Q? Sky are a massive concern in the UK and people must have a Deco system that works with it. I thought by going with the latest Deco issues from the past may have been sorted.
Can anyone please describe what i have to do in an 'idiots guide' laymans terms please, as i'm certainly not a techy but willing to give the Deco's another try. I really dont want to send them back.
Thank you in advance.