I updated my Er605 2.6 from version 2.2.2 to the recent 2.2.3 and openvpn is not working

I updated my Er605 2.6 from version 2.2.2 to the recent 2.2.3 and openvpn is not working

I updated my Er605 2.6 from version 2.2.2 to the recent 2.2.3 and openvpn is not working
I updated my Er605 2.6 from version 2.2.2 to the recent 2.2.3 and openvpn is not working
2023-12-23 16:20:31 - last edited 2024-07-09 01:31:24
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.3

Yesterday I decided to upgrade the er605 from version 2.2.2 to 2.2.3 and although the whole process went well, when I checked the status of the openvpn client. It didn't come out that I made the connection and although I tried to delete and reload all the necessary settings I couldn't connect to the VPN. I should clarify that I have omada 5.13.22 and when I got the notice to update the firmware to 2.2.3 I got an error that the file was invalid but it was resolved by restarting the OMADA server which runs in pc. And I also clarify that using OMADA 5.13.22 and firmware 2.2.2 the VPN works properly. Except that sometimes it disconnects and doesn't auto-connect, I solve that by reloading the OpenVPN settings and reconnecting normally. After all this I decided to go back to 2.2.2 and everything went back to normal

  0      
  0      
#1
Options
1 Accepted Solution
Re:I updated my Er605 2.6 from version 2.2.2 to the recent 2.2.3 and openvpn is not working-Solution
2024-02-08 14:27:09 - last edited 2024-02-08 14:28:08

  @Josvell  If someone sees this post and something similar happens to them, I advise you to check the time and date that runs on the omada (in my case the omada server runs on a PC). The time and date apparently can cause errors if they are not correct  

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:I updated my Er605 2.6 from version 2.2.2 to the recent 2.2.3 and openvpn is not working
2023-12-23 19:07:20

  @Josvell 

 

I had the same issue - it also appears binding an OpenVPN server to a LAN/ VLAN has also disappeared. 

 

It spurred me to finally move to Wireguard on Omada and after a few hours I'm converted, the functionality is much better in my opinion, but not the answer you were probably looking for! 

  1  
  1  
#2
Options
Re:I updated my Er605 2.6 from version 2.2.2 to the recent 2.2.3 and openvpn is not working-Solution
2024-02-08 14:27:09 - last edited 2024-02-08 14:28:08

  @Josvell  If someone sees this post and something similar happens to them, I advise you to check the time and date that runs on the omada (in my case the omada server runs on a PC). The time and date apparently can cause errors if they are not correct  

Recommended Solution
  0  
  0  
#3
Options
Re:I updated my Er605 2.6 from version 2.2.2 to the recent 2.2.3 and openvpn is not working
2024-07-08 17:04:55

  @Josvell You made my day, thx!

  0  
  0  
#4
Options