Official Release Deco X50/X55_V1_1.5.1 Support WireGuard VPN, Client Speed Limit and Fixed WAN Port
This Article Applied to
Deco X50/X55_V1_1.4.1
Firmware Modifications
1. Support WireGuard VPN Server/Client.
2. Support built-in easy configuration of NordVPN/Surfshark VPN.
Note: In compliance with local regulations, the Third-party VPN feature may be restricted in specific regions.
3. Add client speed limit under clients' detailed setting page.
4. Support Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
5. Add Scene Priority under QOS.
6. Add Client MAC Identification to improve the accuracy of device detection.
7. Add more device icons in the Deco APP.
Download Link
| Deco X50_V1 | Deco X50_V1_1.5.5- updated 2024.8.12 |
| Deco X55_V1 | Deco X55_V1_1.5.5- updated 2024.8.12 |
Note:
1. *According to the user feedback and our further test, this 1.5.1 version does not support reverting to 1.4.1 via downgrade firmware recovery directly.
-Ever since 1.3.0, the firmware bin file has been over 32MB which passes the maximum file size of the HTTP uboot upgrade tool. So if you want to revert to 1.4.1, please refer to the following suggestions:
- Still run a firmware recovery on one of the satellites Deco X50 first.
- Try to upload an older official version, 1.2.2_Build_230301.zip for example,
- Then update to 1.4.1 from 1.2.2 via web UI.
- If this process works for the satellite Deco X50, We could repeat it on the main Deco later.
2. Please make sure the Deco APP is up-to-date.
3. Some features might not be available when there are other models in the Mesh network.
Configuration Procedure for the Newly-added Features
WireGuard VPN Server& Client
NordVPN/Surfshark VPN
-
NordVPN
-
Surfshark
Client Speed Limit
Manual Selection of the WAN Port
Set Scene Priority under QOS
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@nixuspix what kind of trouble?
- Copy Link
- Report Inappropriate Content
David-TP wrote
Hi, Thanks for the message.
I haven't received any update of the ETA for V1.2 yet.
If possible, I hope you could start a new thread here(https://community.tp-link.com/en/home/forum/edit/topic?moduleId=39) (or send an email to support.forum@tplink.com) to provide the current network topology and explain what happened or why you need to fix the WAN port.
So I could forward the case to the senior engineer directly to ask for a workaround.
Wait for your reply and best regards.
I know you responded shortly after starting this thread started and again in the quoted reply with no news for the v1.26 update. I purchased the X55 for my family with hopes of setting them up with Wireguard back to my home network however I received the 1.26 revision. Local retailers also only seem to have the 1.26. Are only the 1.26 being produced now? Is there any hopes of these receiving the update for WG in the near future?
- Copy Link
- Report Inappropriate Content
Hi, Welcome to the community.
There is not just V1.2 as I also saw Deco X50_V1.3. The majority version would be V1, then V1.2.
The Deco X50_V1.2 is planned to support the Wireguard VPN protocol, but currently, there is no specific timetable for the release of the supported firmware.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 30425
Replies: 194
Voters 1
